Followers

My Licenses

Arthur Crowe-AC128 Ami-AMIMEL BarbaraJensen-BJ1551 Cdo-Cdo-2090 Celine-CP1764MEL Cilm-CI3927LM CreativeMisfits-CM-213MA DannyLee-DL0014 DreamscapeImaging-DSI780 EliasChatzoudis-EAS11359 Gorjuss-SW2251 Help4CAsper-CAS029MA KeithGarvey-KG1057 MyPspTubes-MPT8644 PicsForDesign-PFD_MEL Pte-PTE0758 RachaelTallamy-011066MEL RomanZaric-RZ083 Satc-SATC0096 TheHunter-APSS0144 ThePspProject-TPP00144 TooshToosh-Toosh1365 TonyTzanoukakis-TTZ115 Verymany-VMT_MEL VmArtists-VMA_MEL Xeracx-IRM015A UYA-UpYourArt3406 ZindyZone-ZZT1089 ZlataMac-ZLATAM_Mel
Tuesday, October 9, 2012

Velvet

October 09, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube art of Celine you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Velvet" By Toxic Desirez you can find the kit Here
Exclusive SATC Template By Kristin
Mask of choice i used mask Linesgrid mask 5 by Kristin Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Amal

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 6 and paste as a new layer.
make bottom rectangle active and open paper 6 again and paste as a new layer.
Make top circle active and open paper 5 and paste as a new layer.
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make bottom circle active and open paper 5 again and paste as a new layer.
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make top square active
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make bottom square active
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make ractangle active and open paper 16 and paste as a naew layer.
Open tube of choice and paste as a new layer.

Open web and rezie to 74% and paste behind the tube.
go to gradient glow take a purple from the tube and set glow to 3
and duplicate and flip.
Open bubbles and place behind the tube and duplicate and mirror.
Open filmstrip and add a new raster layer and take parts of the tube and paste into the frame and merge all together when you are happy.
Open sparkles and paste asa newl ayer up on top of the filmstrip layer.
Open kitty and paste behind the tube layer next to her legs.
Open flower 1 resize to paste on top of top circle and bottom circle.

Make background layer active and flood fill with black.
add mask and merge.
Add copyright and signature, and we are done☺
Written by Mel 9 Oct 2012
Labels:, | 0 comments
Thursday, September 27, 2012

I only look innocent

September 27, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Princess" By Toxic Desirez you can find the kit Here
Template By JEK Creations Here

*~Filter Used~*
EyeCandy4000

*~Font Used~*
Andyfish

Let us Start!
Open up the template shift + d to duplicate it and close out the original.

Remove credit and R6 layers.

Make R11 active and open paper 6 and paste as a new layer.

Make R9 active and open paper 6 again and paste as a new layer.

Now make R5 active and open paper 8 and paste as a new layer.

Make R4 active and open paper 16 and paste as a new layer.

Make R3 active and open paper 16 again and paste as a new layer.

Make R2 active and open paper 9 and paste as a new layer.

Open tube of choice and paste it as a new layer.


Open wire and paste it as a new layer on to R2

Open frame 2 and paste it as a new layer on to R2 over the wire.

Open chain 2 and resize to 52% and paste it right behind the tube.

Open divider and paste as a new layer on to R5 and duplicate and flip.

Open sparkles and paste as a new layer on to R1.

Add a new raster layer and move to bottom, open a paper from the kit and mask it with the mask of choice.

Now add copyright and signature and we are done☺
Written by Mel 27 Sept 2012
Labels:, | 0 comments
Thursday, September 13, 2012

Autumn Notes

September 13, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!
Scrap Kit used "Autumn notes" By Bibi you can find the kit Here
Template halloween templae 3 By Kristin Here

*~Filter Used~*
used Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Amal

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make circle left active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make circle right active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make yellow rectangle active and go to
dbs flux - bright noise
with these settings:
intensity:38
Mix

Make orange rectangle active and open paper 1 again and paste as a new layer.
Go to VanDer Lee- Unplugged X- Interlace
With these settings:
Screen
1-50-50-1-0-50
Make glitter circle orange active 
go to layers- new adjustment layer
hue/saturation/lightness
With these settings: 
Master
hue: 23
Saturation:63
Lightness:31

Open up tube of choice and paste it were you want it.
Open element 1 and paste behind tube.
duplicate and mirror it.
Open element 15 and paste on top of black circle.
Open element 20 and paste on top of orange rectangle, duplicate 
and mirror it.
Open element 44 and paste behind tube.
Open element 52 resize to 48% and paste it behind the tube on orange rectangle layer.
duplicate and mirror it.
Open element 31 and paste it on top of circle layers duplicate flip and mirror it.
Open element 18 and paste it with the tubes waist.

Now add coyright and signature and we are done☺
Written by Mel 13 Sept 2012
Labels:, | 0 comments
Tuesday, September 11, 2012

Trick er treat

September 11, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Elias Chatzoudis you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Trick or treats" By Bibi you can find the kit Here
Template Halloween template 7 By Kristin Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Andyfish

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove circle 1 layer,

Make circle right active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make circle left active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make left square active and choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make right square active choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make cirlce 2 active and choose a blue color from paper 4 and flood fill with it.
Make rectangle active and flood fill with purple color from paper 4
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Now make pixel words layer active and make text black.
Then make dotted circle 2 active and make it black as well.
Open tube of choice and paste it as a new layer on to circle 2.

Open element 7 and paste it as a new layer on dotted circle layer.
Open element 74 and paste on to both circle right and left.
Open element 11 and paste it on both sides of the tube.
Open element 26 and paste it of top of left and right squares.
Open element 6 resize to 77% and paste as a new layer on top of the tubes waist.
Open element 54 and paste as a new layer on top of rectangle.
Open element 70 and paste on to rectangle on both sides of the tube.
Open element 72 and paste it on top of rectangle and duplicate and mirror it.

Now add copyright and signature and we are done☺
Written by Mel 11 Sept 2012
Labels:, | 0 comments
Saturday, September 1, 2012

Rock'N Roll

September 01, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Music Is My Life" By Toxic Desirez you can find the kit Here
Template 183 By Kristin Here
Mask of choice

*~Filter Used~*
Xero 
Dbs flux 
 EyeCandy4000

*~Font Used~*
Lino Chisel 
Tangerine

Let's Start!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 14 and paste as a new layer.

Make bottom rectangle active and open paper 14 again and paste as a new layer.

Make the white top rectangle active and open paper 8 and paste as a new layer.
Make bottom white rectangle active and open paper 8 and paste as a new layer.

Make grey top rectangle active and open paper 10 and paste as a new layer.

Make grey bottom rectangle active and open paper 10 and paste as a new layer.

Make grey top square active and open paper 9 and paste as a new layer

Make bottom grey square active and open paper 9 and paste as a new layer.

Make dark grey top rectangle active and open paper 23 and paste as new layer.

Make dark grey bottom rectangle active and open paper 23 and paste as new layer

Make circle active and open paper 26 and paste as a new layer.

Elements:
Open star circle and paste as a new layer behind the circle.

Open frame 1 and paste as a new layer on top of circle layer.

open cd and paste as a new layer under frame.

Find a lyric you like and paste onto cd layer.

Open sparkles and paste as a new layer on to the cd layer.

OPen music note star resize to 50% paste were you want it.

Paste tube of choice as a new layer.

Now with the font of choice and size 48 write Rock'n Roll

Use gradient glow if you want to.

Then take the font of choice for signature and write name in over the

rock'n roll text.

Now go to background layer and flood fill with color of choice and add mask
of choice.

Add copyright and we are done☺
Written by Mel 1 Sept 2012
Labels:, | 0 comments

I Make Boys Cry

September 01, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of  Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Toxicity" By Toxic Desirez you can find the kit Here
Template Emo misfits temp 2011 By Kristin Here
Mask of choice

*~Filter Used~*
Xero
Dbs flux
EyeCandy4000

*~Font Used~*
WL Scribble Flinger

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Delete word art layers.
Make purple rectangle 1 active and open paper 11 and
paste as a new layer.

Move up and make purple rectangle 2 active and open paper 11 again and paste as a new layer.

Make pink rectangle 1 active and open paper 7 and paste as a new layer.

Make pink rectangle 2 active and open paper 7 and paste as a new layer.

Move up to dotted rectangle 1 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Move up to dotted rectangle 2 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Now make rectangle active and open paper 21 and past as a new layer.

Make circle active and open paper 10 and past as a new layer.

Remember to drop shadow on the layers.
Open tube and paste as new layer.

Open wire and paste as new layer on top of rectangle layer.

Open thorn border and resize to 40% paste on top of thin black rectangles

Now delete both thin black rectangle layers and add drop shadow.

Open up spider and paste it were you want it.

Now add a new raster layer and move to bottom.
flood fill with black and add mask of choice.

Add copyright,signature and wordart
And we are done☺

Written by Mel 01 September 2012
Labels:, | 0 comments
Tuesday, August 21, 2012

Mental Institution

August 21, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of  Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Hellz Angel" By Toxic Desirez you can find the kit Here
Template 170 By Kristin Here
Mask of choice i used mask 122 by Design By Vaybs Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
 L & K Zitah

*~Font Used~*
Suger Death

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make thin top rectangle active, mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make thin bottom rectangle active , mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now move up and make purple top rectangle active, mark and open paper 16
and paste as a new layer.

Move up and make purple bottom rectangle active, mark and open paper 16
and paste as a new layer.

Make blue top rectangle active, mark and open paper 10 and paste as a new
layer.

Make blue rectangle bottom active, mark and open paper 10
and paste as a new layer.

Make purple top rectangle active, mark and open paper 13 and 
paste as a new layer.

Make purple bottom rectangle active, mark and open paper 13 and 
paste as a new layer.

Now make pink cirlce left active, mark and flood fill with black
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Then make pink cirlce right active, mark and flood fill with black.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make the circle active mark and open paper 11 and
paste as a new layer.

Elements:
Open web and paste it on top of cirlce layer.
Now open film strip add a new rater layer and flodd fill with black.
Then take parts of the tube and paste it into all the windows in the
film strip frame.
Now go to xero-radience
With these settings: 44- 58-189-222

Now merge only the tube layers, and duplicate.
Go to the original tube layer and go to properties - luminance legacy.
Then go to the duplicated tube layer and go to properties - screen.

Then again go to the original tube layer and go to plugins
L & K Zitah 
With these settings: 5-33-37-47-69-66-57-32

Then again go to the duplicated tube layer and go to plugins
L & K Zitah 
With these settings: 5-33-37-47-69-66-57-32

Then go to vanderlee- unplugged x-interlace
With these settings: 1-50-50-1-0-50
Do this to both orginal and duplicated tube layer.
Then merge all and paste the film strip as a new layer ontop of the web

Open doodle and put some gradient glow on it, then paste it behind the film strip.

Open splatter and paste it over the thin top layer then duplicate
and flip and mirror it and move it up to bottom thin rectangle.

Open sparkles and place it as a new layer on top of film strip.

Open skulls and paste them were you want.

Now flood fill the background layer with black, add mask of choice.

Now paste your tube as a new layer

Then add signature and copyright and we are done=)
Written by Mel 21 Aug 2012
Labels:, | 0 comments
Saturday, August 18, 2012

Fashion

August 18, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Ismael Rac you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Fashion" By Bibi's Collection you can find the kit Here
Template kk temp10 By Kandi Kissez 

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L and K Zitah

*~Font Used~*
Amaldemo

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start by deleting credits, blue heart, stars and pink circle 1

Use your dropper tool and steal a pink color from paper 4
then make black rectangle active and flodd fill with the choosen color.
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Now move up to pink circle and make it active open paper 3 
add as a new layer...

Move up to black circle and make it active mark and open
paper 2 and add as a new layer...

Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Make blue rectangle active and mark and open paper 4
paste as a new layer..
add drop shadow.

Make angled rectangle active and mark and open tube of choice
and paste as a new layer, invert and delete.
Duplicate tube layer and make the orginal tube layer active
go to properties and choose luminance legacy.
Move up to duplicated tube layer and go to properties 
and choose soft light..
Mark the orginal tube layer
Now go to plugin L And K
Zitah
With these settings: 
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Now go to the duplicated tube layer 
Now go to plugin L And K
Zitah
With these settings: 
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32

Then mark the orginal tube layer again and go to
Xero- Radiance 
With these settings: 128 - 50 - 128 - 255

Then mark the duplicated tube layer and
Xero- Radiance 
With these settings: 128 - 50 - 128 - 255

Now make the white circle active and 
go to Xero - Fritillary
With these settings:
7 - 30 - 12 - 39

Make white circle active 
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Open element 68 and paste on top of black cirlce layer.

Open element 14 and paste it on top of layer angled rectangle and
blue rectangle.

Open element 18 resize 60% and paste as a new layer on top of
pink circle layer 2.

Open element 22 and paste on top of black circle.

Open element 24 and paste on top of black rectangle were you want it.

Now add the signature and copyright☺
Written by Mel 18 Aug 2012
Labels:, | 0 comments

Bad Reputation

August 18, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sweet Music 2" By Toxic Desirez you can find the kit Here
Template 177 By Kristin Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Dk Criss Cross
BillyBop

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make top black square active
mark with your magic wand tool and open paper 11
and paste as a new layer.

Make bottom black square active then mark and open paper 11
and paste as a new layer.

Move up and make top red circle active and open paper 9
and paste as a new layer...

Then move up to bottom red circle and make it active then mark and 
open paper 9 and paste as a new layer.

Move up and make top rectangle active and mark and open
paper 2 and paste as a new layer.
Then go to Xero- Fritillary 
With these settings: 7 - 30 - 12 - 39

Move up and make bottom red rectangle active mark and open paper 2
and paste as a new layer.
Then go to Xero- Fritillary 
With these settings: 7 - 30 - 12 - 39

Make round rectangle active and flood fill with a light grey color and
open tube of choice and paste.
duplicate the tube layer and mirror it,
duplicate both tube layers.

Make the orginal tube layer active and go to properties and
choose luminance legacy, then go to the duplicated layer and choose
soft light.

Make the duplicated tube layer active and go to properties and
choose luminance legacy, then go to the duplicated 2 layer and choose
soft light.

Now go to xero . radiance
with these settings:
128-50-128-255
Do this to all tube layers.

Make round rectangle active again and go to
VanDer Lee - Unplugged X - Interlace
With these settings: 1-50-50-1-0-50

Move up and make circle layer active and mark and open paper 21
paste as a new layer.

Open frame 1 and paste as a new layer on top
of circle layer.
Open element scatter and paste on background layer as a new layer and
duplicate adn flip it.

Open skull & web element and paste as a new layer behind round rectangle.
duplicate and flip it.

Open speaker and paste as a new layer on top of circle layer into the frame 1.

Open element wire and paste on top of frame1 and under the speaker layer.

open element note circle and paste as a new layer on top balck square layer.

Gradient glow with a red color.

Paste the tube of choice as a new layer and
go to Xero - Radience 
This settings: 128-50-128-255

Now add the word art you want.
Signature and copyright and we are done☺
Written by Mel 18 Aug 2012
Labels:, | 0 comments

Homework

August 18, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Zlata M you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Total Rebel" By Toxic Desirez you can find the kit Here
Template 174 By Kristin Here
Mask of choice i used mask CMC-LinesGrids-mask1 by Kristin Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L & K Zitah

*~Font Used~*
Fely

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make top grey rectangle active then mark 
go to Xero - fritalliry
with these settings: 7-30-12-39

Make bottom grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39
Make top maroon rectangle active then mark
and open paper 9 and paste as a new layer.

Make bottom maroon rectangle active then mark
and open paper 9 and paste as a new layer.
Make top pink cirlce active mark and open 
paper 7 and paste as a new layer.

Make bottom pink cirlce active mark and open 
paper 7 and paste as a new layer.
Make top blue rectangle active then mark and open
paper 14 and paste as a new layer.
Make bottom blue rectangle active then mark and open
paper 14 and paste as a new layer.

Make balck round rectangle active, mark and open tube of choice and 
paste as a new layer. Use your moving tool to get it were you want it.
Invert and delete, duplicate and mirror.
Duplicate both tube layers again so you have two of both of them.
Go to orginal tube layer 1 and go to properties - luminance legacy
then make orginal tube layer 2 active and go to properties - screen
Go to duplicated tube layer 1 and go to properties - luminance legacy
then make dupøicated tube layer 2 active and go to properties - screen

Go make black round rectangle active and go to
xero-fritillary
with these settings: 7-30-12-39
Now go to top orginal tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50
Then go to top duplicated tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50
Then do this to both top tube layers
go to L and K Zitah
With these settings: 5-33-37-47-69-66-57-32
Now make black circle active then mark and open paper 4
and paste as a new layer.
Now go back and add drop shadow to all the template layers i you did not do it already!

Take film strip and paste it behind the black round rectangle layer
duplicate and flip.
Open sparkles and paste as a new layer on top of the tube layers.
Open frame 2 and paste as a new layer on top of cirlce layer.
Open tube of choice and paste as a new layer on top of circle layer
duplicate and move on top of frame 2.
Use your free hand tool and remove parts of the tubes you do not
 want there so it looks like the girl is standing inside frame 2.
Put on some radience if you want to.
Open element flame and paste on top of top and bottom
grey rectangle, duplicate as many times you like
move and flip. i decided at this point to remove both
top and bottom grey rectangles it looked so much better
with only the silver flames=)

Now make background layer active and flood fill with black,
choose a mask and add.
Then add a new reaster layer and flood fill with a light grey color
go to dbs flux- bright noise
these settings: lighter 47
and add the same mask.
then duplicate the black mask layer and mirror it and move both black 
mask layer under the silver grey one.

Then add your signature,copyright and we
are done☺
Written by Mel 18 Aug 2012
Labels:, | 0 comments
Saturday, August 4, 2012

Funy Buny

August 04, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Alfadesire you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Funy Buny" By Toxic Desirez you can find the kit Here
Template 174 By Kristin Here

*~Filter Used~*
used Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Sugar death 2



Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at the bottom with top grey rectangle mark and open paper 9
and paste as a new layer...
Move up to bottom grey rectangle mark and open paper 9 again
and paste as a new layer..
Move up to top maroon rectangle mark and open paper 8
and paste as a new layer...
On to bottom maroon rectangle mark and open paper 8 again
and paste as a new layer...
Move up to top pink circle mark and open paper 7
and paste as a new layer...
On to bottom pink circle mark and open paper 7
again and paste as a new layer...
Move up to top blue rectangle mark and open paper 10
and paste as a new layer...
Move on to bottom blue rectangle mark and open paper 10 again
and paste as a new layer...
Now move up to black round rectangle mark and open paper 21
and paste as a new layer..
Delete the layer black circle..
Remember to set drop shadow on all the layers
with these settings :
OV: 2,00
H: 2,00
AB: 50
Blur: 5,00
Color black
to the bottom layers
and
OV: -2,00
H: -2,00
AB: 50
Blur 5,00 color black
to top layers
Now drag the black round rectangle down two layers.
Elements:
Now open film strip and add a new raster layer and flood fill with a color from the kit and move to bottom.
Now take bits of the tube you want to use and paste into the frame as you like.
Then merke down the tube layers and go to properties
screen.
Then go to vanderlee - unplugged x - intelace
with these settings: 1 - 50 - 50 - 1 - 0 - 50
Merge down and paste as a new layer.

Now paste the tube of choice on top as a new layer.
Open bow 1 and resize to 40% paste on the filmstrip mirror it.
Open flame and resize to 70% and paste behind the filmstrip layer.
duplicate and mirror.
Open flower 1-2 and 3 and resize to 28% and paste them behind the filmstrip layer so they showes just on the edge of the filmstrip, duplicate and mirror them to get them as you want..
Open paw print resiza to 37% and paste as a new layer on top of the filmstrip duplicate and mirror...
Open sparkle 1 and paste as a new layer on top of bottom
blue rectangle and duplicate and flip...
Open splatter paste as a new selection on the left side behind the tag
duplicate,mirror,flip until you have coevered the whole background..
Take the word art and paste as a new layer behind the film strip..
Now add signature and copyright and we are done☺

Written by Mel 4 Aug 2012
Labels:, | 0 comments
Friday, August 3, 2012

Devilish Diva

August 03, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Dazzling" By Bibi you can find the kit Here
Template kk 29 By Kandi Kissez 

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
Enkis Filter
Dbs Flux

*~Font Used~*
Carbfred

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and mark left frame back and open paper 2
paste as new layer invert and delete.
Duplicate and mirror and delete the right frame black.
Now move up to circle mark and open paper 1
and paste as a new layer.
Delete the polaroids, filmstrip back1, faded strip, film strip 1 layers.

Open element 93 and paste it ob top of the film strip back 2 and 3.
Use gradient glow 3.00
Open Element 16 and paste it on to the circle layer and duplicate and flip it.
Open element 18 and paste on to circle layer.
Open element 24 and paste on circle layer.
Open element 34 and paste onto left frame back duplicate and mirror, duplicate and flip and duplicate and mirror again.
Open element 4 and paste on to left frame back duplicate and mirror.
Open element 62 and paste on to glitterframe were you want it and duplicate and mirror.
Now go to circle and open filter unlimited 2.0 and find enkis filter
and Jon Mullen's Japaese fan and add
Open element 76 and paste on to circle duplicate and flip.
Open element 89 and paste it were you want it.
Now open up the tube of choice and paste it as a new layer.
Go to Xero - Radience
with these settings: 136 - 65 - 107 - 227
Now move the word art were you want it and go to dbs flux - spider web
with these settings: 3 - 6 - 69
Add copyright and signature and we are done!☺
Written by Mel 3 Aug 2012
Labels:, | 0 comments

Endless Summer

August 03, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Rock" By Toxic Desirez you can find the kit Here
Template By Slow

*~Filter Used~*
Xero 
Unplugged X 
EyeCandy4000 
Vm Distortion
 Dbs Flux

*~Font Used~*
Clarck summit 
Sugar Death 2

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start with bg layer open filter unlimited 2.0 and go to Vm distortion
Radial pox with these settings: 175 - 99 - 109 - 39
Go to dbs flux - spider web
with these settings: 86 - 34 - 65

Now move on to 1 and open paper 21 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Open layers 2-3 and 4 and merge down
now mark and open paper 25 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now on to 5 mark and open paper 16 and paste
as a new layer.
On layer 6 mark and open paper 15 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Delete layer 7-8
Go to layer 9 mark and open paper 17 and paste as a new layer.
Got to layer 10 mark and add a new raster layer and flood fill with black
On layer 9 - 10 use gradient glow 3.00 with color hot pink.
Now find a lyric you want and write into layer 10 with a green color from the tube.
Add tube and copyright and
 signature and we are done☺
Written by Mel 3 Aug 2012
Labels:, | 0 comments
Saturday, July 21, 2012

Steampunk Cutie

July 21, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Steampunk Cutie" By Toxic Desirez you can find the kit Here
Template 185 By Kristin Here
Mask Lines Grinds mask 3 By Kristin Here

*~Font Used~*
CalligraPhillip

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start from the bottom with bottom rectangle mark and open paper 15
and paste as a new layer.
Move up to top square and mark and open paper 15
paste as a new layer..
Now move up to layer called top square mark and open
paper 11 and paste as a new layer
Then move on to bottom square layer mark and open paper
11 and paste as a new layer.
Now on to black top rectangle mark and open paper 12
paste as a new layer.
Then on to the bloack bottom layer mark and open paper 12
and paste as a new layer.
Move up to circle layer mark and open paper 14
and paste as a new layer.
Move up to the rectangle layer mark and open paper 13
and paste as a new layer.
Open new canvas 750 X 650 flood fill with black
open mask of choice and add, paste as a new layer
on the background layer.
　
Open up the filmstrip and add a new rater layer and flood fill with the
color of choice and move to bottom.
Now open the tube of choice and resize so you get the size you need,
paste some of the parts of the tube as new layers on to the flood filled background.
Then use the selection tool to remove overflood so it looks neat and nice.
Right click and choose properties choose screen.
Then go to unplugged x - interlace
With these settings: 1 - 50 - 50 - 1 - 0 - 50
Now merge all and paste as a new layer on top of rectangle layer.
Open element star and gear swirl and paste as a new layer on top
of backgroun layer, duplicate, mirror and flip.
Open element sparkles and paste as a new layer on top of
circle layer.
Open element bow 1 resize to 29% and paste in both upper corner of the filmstrip.
Open cluset frame and paste as a new layer on to circle layer.
Open the steam punk label and paste it near the tubes legs.
Now add signature and copyright!☺
Written by Mel 21 July 2012
Labels:, | 0 comments

Kiss My Ass

July 21, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of  Skyscraps you can buy  Here
Scrap Kit used "KissMyAzz"  By Bibi Collection you can find the kit Here
Template 184 By Kristin Here

*~Font Used~*
CalligraPhillip

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at the bottom with top circle mark and open paper 3 (pink) and paste as a new layer.
Now move up to bottom circle mark and open paper 3 (pink) and paste as a new layer.

Now move up to top square mark and open paper 3 (blue) and paste as a new layer.
And now on the bottom square mark and open paper 3 (blue) and paste as new layer.

Move up to top rectangle layer mark and open paper 6 and paste as a new layer.
Then up to bottom rectangle layer mark and open paper 6 and paste as a new layer.

On the round rectangle layer mark and open paper 2 and paste as a new layer..

Now go to circle layer and open paper 3 (blue) and paste as a new layer.

Open the tube of choice and resize to what size you need and paste as a new layer on top of circle.

Open element 67 and paste as a new layer on top of circle layer.
Open element 69 and paste as a new layer on background.
Open element 10 and paste on the bottom square layer so it shows, 
duplicate and flip.
Open element 11 and paste it as a new layer on the cirlce layer.
Open element 12 and paste on top of circle layer.
Open element 26 and paste under circle layer duplicate
and flip..
Open element 32 and paste were you want them.
Open element 21 and paste it were you want it.
Open element 50 and paste it as a new layer on top of circle layer.
Open element 51 and paste as a new layer on top of circle layer.
Open element 80 and paste as a new layer were you want it..

Written by Mel 21 July 2012
Labels:, | 0 comments
Wednesday, July 11, 2012

S & M

July 11, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Black Heart" By Toxic Desirez you can find her kits Here
Template 179 By Kristin Here
Mask of choice i used mask by Kristin Here

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

 *~Font Used~*
48ver lost

 Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom with top black square mark and open paper 10
and paste as a new layer.

Then move up to bottom black square mark and open paper 10
and paste as a new layer.

Go to rectangle mark and open paper 9 and paste
as a new layer.

Move up to top red circle mark and open paper 16 and
paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0

Now bottom red circle mark and open paper 16
and paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0

On to top round rectangle mark and open paper
7 and paste as a new layer..

Then to bottom round rectangle
mark and open paper 7 and paste as a new layer.

Go to circle mark and go to xero - frtillary
With these settings: 5 - 30 - 10 - 0

Choose a lyric you like and that fits the tube and paste it into
cirlce layer.

Elements:
Now open frame 2 and paste as a new layer
Open collar resize 40% and paste were you want it..
Open butterfly resize to 30% and paste were you like it.
Open flower 1 resize to 30% and paste it were you want it.
Open sparkles and paste it as a new alyer on bottom round rectangle.
Open frame 1 and paste as a new layer on top of bottom round rectangle.
Open a new canvas 750 X 650 and floodfill with black and add mask of choice.

Now add tube of choice,signature and copyright!
Written by Mel 11 July 2012
Labels:, | 0 comments
Sunday, July 8, 2012

Strawberry Passion

July 08, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of Ismael Rac  Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Strawberry Passion" By Bibi you can find the kit Here
Template 2 By Ella

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Sagimaw light

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove rec1 and rec2 layers.
Rotate Clockwise 90 

Start with the frame layer mark and flodd fill with this color #dc2837
Then dbs flux - bright noise
With these settings: 32 Mix

Now on to rec3 mark and open your close up tube of
choice and paste as a new layer.
Now right click and choose properties luminance legacy
duplicate and right click then properties
this time choose hard light.

Now go to unplugged x
With these settings: 1 - 50 - 50 - 1 - 0 - 50

Now take the tube of chocie and paste to the left or right for the frame and

Then go Xero - Porcelain
With these settings: 50 - 128 - 128 - 0 - 0 - 255

Elements!
Open element 10 and paste behind the rec1 and duplicate and move around as you like.
Open element 12 and paste on the mesh layer and duplicate 5 times and move up one and duplcate that 5 times as well.

Open element 16 resize to 70% and paste behind the legs of your tube.
Open element 17 and resize to 50% and paste behind the legs of your tube.
Open element 19 resize 60% and paste it besides the feet of your tube to the left.
Open element 21 and paste as a new layer on the mesh layer duplicate and flip.
Open element 2 and paste as a new layer on to the frame layer.
Open element 23 and place the drake inside the hand of your tube.
Open element 30 resize to 50% and paste near the tubes leg infront of all the others.
Now add the words,signature and copyright and we are done!
Written by Mel 8 July 2012
Labels:, | 0 comments
Saturday, July 7, 2012

Sassy Lemon

July 07, 2012 | Posted by | | Edit Post
*~Supplies Needed~*
Tube of choice i am using the art of  Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Lemon"  By Bibi you can find the kit Here
Template By  Melissaz Creationz Here
Mask of choice i used mask by Kristin Here

*~Filter Used~*
Xero
Dbs Flux
Unplugged X 

*~Font Used~*
Dobkin

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at the bottom with raster 1 mark and open paper 2 and paste a a new layer.
Go to dbs flux - bright noise 
With these settings: Intensity 41 Mix

Then go to layer merged and steal a bright green color from the paper 2 and flood fill with it.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 21

Now go to raster 2 and mark with your magic wand tool, invert and use same color you stole from paper 2 before, and flood fill with it.
Go to dbs flux - bright noise 
With these settings: Intensity 41 Mix

Now to the other merged layer "the frames"
make them both black.

Then up to raster 4 mark and open paper 2 again resize to 50% and paste as a 
new layer invert and delete.

Go to raster 3 "frame" and make it black.

Then you open a new canvas 700 x 700 and flodd fill with what color
you like and add your mask layer to it.

Mark raster 4  then open up the close up of
 the tube you want to use, then duplicate it.
Go to properties luminance legacy.
Then go to the duplicated layer and properties and screen.

Open element 5 and paste it on each side of the frames.

Open element 32 resize to 41% then paste it on top of
the merged rectangles then duplicate and flip.

Open element 31 resize to 41% and paste near the flowers then duplicate and mirror.

Open element 23 and paste it behind raster 1 duplicate and mirror.

Open element 50 then go to dbs flux - bright noise
With these settings: Intensity 41 Lighter

Now add word art, signature and copyright
and we are done!
Written by Mel 7 July 2012
Labels:, | 0 comments
Subscribe to: Posts (Atom)

Search

Terms Of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun!

Blog Archive

Blogger Template created with Artisteer by .