Followers

My Licenses

Arthur Crowe-AC128 Ami-AMIMEL BarbaraJensen-BJ1551 Cdo-Cdo-2090 Celine-CP1764MEL Cilm-CI3927LM CreativeMisfits-CM-213MA DannyLee-DL0014 DreamscapeImaging-DSI780 EliasChatzoudis-EAS11359 Gorjuss-SW2251 Help4CAsper-CAS029MA KeithGarvey-KG1057 MyPspTubes-MPT8644 PicsForDesign-PFD_MEL Pte-PTE0758 RachaelTallamy-011066MEL RomanZaric-RZ083 Satc-SATC0096 TheHunter-APSS0144 ThePspProject-TPP00144 TooshToosh-Toosh1365 TonyTzanoukakis-TTZ115 Verymany-VMT_MEL VmArtists-VMA_MEL Xeracx-IRM015A UYA-UpYourArt3406 ZindyZone-ZZT1089 ZlataMac-ZLATAM_Mel
Showing posts with label Barbara Jensen. Show all posts
Showing posts with label Barbara Jensen. Show all posts
Sunday, February 2, 2014

Bad is fun

♥Supplies♥
Tube of choice i used the beautiful art of Barbara jensen Here
Scrap kit Beauty By Bibi Collection Here
Template used kktempz23 by Kandi Kissez

♠Filter♠
Eye Candy 4 - Gradient Glow

Dsb Flux- Bright noise

◄Font►
Caramel nuggets

Let's start!
Open template and press shift +D to duplicate the template and close the original.

Remove frame back layer, kandi word art and word art back.

Make top red cirlce active and open paper 12 and paste as new layer,

add some white gradient glow to it and aslo some bright noise.

Make black circle active and open paper 1 and add as a new layer.

Make bottom red circle active and open paper 12 and paste as new layer,
add some white gradient glow to it and also some bright noise.

Make black rectangle active and open paper 12 and paste as new layer, 
add some white gradient glow to it and also some bright noise.

←Elements→
Open elements 6 and resize it to 40% and paste it onto the white frame and duplicate it and mirror, duplicate and move theo ther to the middle.

Open element 86 and resize to 70% and paste as a new layr on top of white frame, duplicate and move it little up, duplicate again and move further up.

Open element 94 and paste as a new layer, duplicate and flip.

Open element 116 and paste it to the down left corner.

Open element 113 and paste it behind the frames.

Open element 92 and paste it were you like it.

Open element 76 and paste it were you prefer it.

Open element 2 and paste it in front of the chest.

Open element 17 and paste it behind your tag, duplicate and mirror.

Add copyright and name and we are done!
Wednesday, January 15, 2014

Angel in disguise

♥Supplies♥
I used the gorjuss art of Barbara Jensen  get her tubes Here
Scrap kit used Lovely Angel by Bibi Collection  Here
Template used template 9 by Angi Rique Here

♦Filter♦
Dsb Flux - Bright Noise

◄Font►
Jellyka Love and passion

Let us start!
Open template and press shift +D to duplicate the template and close off the original.
Make left circle layer active and open paper 4 paste as a new layer.
Now make right circle active and paste paper 4 as new layer.
Make center square bacl layer active and go to effects 
 - plugins and use dsb flux filter - bright noise 
with these settings:  Intensity: 37  Mix
Make center square active and open paper 1 and paste as new layer.

←Elements→
Open element 83 paste it as a new layer behind the circle left and duplicate and then mirror.
Open element 82 and paste as a new layer on top of center square and duplicate and flip.
Open element 72 and paste it on top of the left and right texture rectangles.
Open element 66 and paste it on top of texture rectangle left then duplicate and mirror, duplicate again and flip and then duplicate and mirror then flip.
Open element 59 and resize to 50% paste as a new layer on top of the texture rectangle right then duplicate and mirror. (make sure they cover the corners)
Open element 55 and paste as a new layer behind the tube, duplicate and mirror.
Open element 48 and paste it on top of center sqare, behind the gate, duplicate and mirror.
Open element 49  and paste it on top of center sqare, behind the gate, duplicate and mirror.
Open element 48  again and paste it on top of center sqare, behind the gate, duplicate and mirror.
Then open element 28 and paste it were you ant it.

Now we are done! Hope you enjoyed my tutorial
Tuesday, October 15, 2013

Bloody Kiss


*~Supplies Needed~*
Tube of choice i used the gorjuss art of Barbara Jensen you can get the tubes Here
Scrap kit used Zombiefied by Kristin
you can find the kit Here
Template used template 208 by Kristin, you can download it on her blog Here


*~Filter Used~*
Eye Candy 4 - Gradient Glow
Xero - Radience
VanderLee - Interlace
Dsb Flux - Bright Noise
 
*~Font i used~*
Drakon

Let us start!

Open template and press shift + D to duplicate the template and close the original.
Make raster 12 active and open paper 5 and paste as a new layer,invert and delete.

Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
(But this is optinal)

Make copy of raster 12 active and use the paper 5 again and paste it as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 11 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 11 active and open paper 4 again and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make raster 6 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35

Make copy of raster 1 active and open paper 1 and paste as a new layer,invert and delete.

Make raster 3 active and add some bright noise with these settings: intensity 35 Darker

Make copy of raster 13 active and add a new raster layer and flood fill with red and add some bright noise with these settings: intensity 35 Darker.

Make raster 14 active and open paper 1 and paste as a new layer.
add some gradient glow to is this time use color white and same settings as before.

~*Elements*~
Open web and paste it as a new layer on top of raster 13.

Open brad and paste it behind both raster 11.

Open city and paste as a new layer behind raster 5.

Open frame 3 and paste as a new layer on top of raster 13.

Open splatter and paste as a new layer move to bottom, duplicate and mirror as you like.

Open the tube of choice and paste as a new layer were you want it.

Open sparkles and paste on top of your tube.

Now add the words
"Take me from this earth an endless night
this, the end of life.
From the dark I feel your lips
and taste your bloody kiss."
Add copyright and tagname and we are done!

Written By Mel 15th Oct 2013
Tuesday, August 27, 2013

Goldlicious

*~Supplies Needed~*
Tube of choice i am using the art of Barbara Jensen you can buy the tubes Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Zlata Licious" By Bibi Collection you can find her kits Here
Template 113 By Millie Here

*~Filter Used~*
Eyecandy4000
Dsb flux
Xero 
L and K 
Unplugged X

*~Font Used~*
Mirella Script

Let's Start!
Open template and press shift + D to duplicate the template and close the original. 
Make layer 1 active and open paper 9 and paste as new layer, invert and delete.
use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these settings :
Intensity: 41 Mix
Do this again with the color black.

Go to layer 2 and make that active then open paper 2 and paste as a new layer, invert and delete.
use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Do this again with the color black.

Then make layer 3 active open paper 2 and paste as a new layer, invert and delete.
use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Do this again with the color black.

Make layer 4 active then open paper 9 duplicate and close original, then resize to 600 x 300
paste as a new layer, invert and delete.
Make the layer 4 active again and use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Repeat this with the color black.

Make layer 5 active and open paper 6 and paste as a new layer, invert and delete.
then open paper 2 and paste as a new layer on top of paper 6 and set the opacity to 92.
Then merge down.
use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Do this again with the color black.

Make layer 6 active and add a new raster layer, flood fill with a gold color.
Make layer 7 active and add a new raster layer, flood fill with white.
Use your close up of choice and add as a new layer, use your moving tool to get the cu as you want, then invert and delete.
Duplicate and mirror.
Merge the close up layers together and duplicate again, make the botom layer of the close up tubes active then go to properties - Luminance Legacy.
Now go to the top close up layer and go to properties - soft light
Now go to effects - plugins - xero - radiance
These settings: 180 - 165 - 246 - 202

Go back to layer 7 make it active use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Do this again with the color black.

Then go make layer 8 actve use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then on color take the arrow to almost full color.
Then use your magic wand and press only the color border you did before and go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix
Then delete layer 9
and make layer 10 active.
use your dropper tool and steal a color that looks golden and go to gradient glow with these settings:
Glow width: 3.00
Soft corners: 25
Opacity: 100%
Then go to plugins - effect - dsb flux - bright noise with these setings :
Intensity: 41 Mix

ELEMENTS
open element 100 and paste as a new layer on top of layer 3.
Open element 103 and paste as a new layer on top of layer 3.
Open element 99 and paste on top of layer 1.
Open element 95 and resize to 380 x 380 paste down in the left corner on layer 10 and duplicate and mirror.
Open element 91 nad resize 50% and paste on top of layer 3 duplicate and mirror.
Open element 85 resize to 64% and paste as a new layer on top of layer 6.
Open element 80 and paste as a new layer on top of layer 6.
Open element 77 and resize to 61% and paste as a new layer on top of layer 5 duplicate and mirror.
Open element 67 resize to 61% and paste as a new layer ontop of layer 10.
Open element 32 and resize to 67% make layer 1 active and paste as new layer and
invert and delete.
Now open your tube of chocie and paste it as a new layer.
Now add the copy right and tag name and we are done.
Hope you enjoyed my tutorial☺
Written by Mel 27 Aug 2013

Search

Terms Of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun!

Blog Archive