Profile
Tuesday, August 21, 2012
Mental Institution
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Hellz Angel" By Toxic Desirez you can find the kit Here
Template 170 By Kristin Here
Mask of choice i used mask 122 by Design By Vaybs Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L & K Zitah
*~Font Used~*
Suger Death
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make thin top rectangle active, mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now make thin bottom rectangle active , mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now move up and make purple top rectangle active, mark and open paper 16
and paste as a new layer.
Move up and make purple bottom rectangle active, mark and open paper 16
and paste as a new layer.
Make blue top rectangle active, mark and open paper 10 and paste as a new
layer.
Make blue rectangle bottom active, mark and open paper 10
and paste as a new layer.
Make purple top rectangle active, mark and open paper 13 and
paste as a new layer.
Make purple bottom rectangle active, mark and open paper 13 and
paste as a new layer.
Now make pink cirlce left active, mark and flood fill with black
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Then make pink cirlce right active, mark and flood fill with black.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now make the circle active mark and open paper 11 and
paste as a new layer.
Elements:
Open web and paste it on top of cirlce layer.
Now open film strip add a new rater layer and flodd fill with black.
Then take parts of the tube and paste it into all the windows in the
film strip frame.
Now go to xero-radience
With these settings: 44- 58-189-222
Now merge only the tube layers, and duplicate.
Go to the original tube layer and go to properties - luminance legacy.
Then go to the duplicated tube layer and go to properties - screen.
Then again go to the original tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32
Then again go to the duplicated tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32
Then go to vanderlee- unplugged x-interlace
With these settings: 1-50-50-1-0-50
Do this to both orginal and duplicated tube layer.
Then merge all and paste the film strip as a new layer ontop of the web
Open doodle and put some gradient glow on it, then paste it behind the film strip.
Open splatter and paste it over the thin top layer then duplicate
and flip and mirror it and move it up to bottom thin rectangle.
Open sparkles and place it as a new layer on top of film strip.
Open skulls and paste them were you want.
Now flood fill the background layer with black, add mask of choice.
Now paste your tube as a new layer
Then add signature and copyright and we are done=)
Written by Mel 21 Aug 2012
Saturday, August 18, 2012
Fashion
*~Supplies Needed~*
Tube of choice i am using the art of Ismael Rac you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Fashion" By Bibi's Collection you can find the kit Here
Template kk temp10 By Kandi Kissez
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L and K Zitah
*~Font Used~*
Amaldemo
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start by deleting credits, blue heart, stars and pink circle 1
Use your dropper tool and steal a pink color from paper 4
then make black rectangle active and flodd fill with the choosen color.
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow
Now move up to pink circle and make it active open paper 3
add as a new layer...
Move up to black circle and make it active mark and open
paper 2 and add as a new layer...
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow
Make blue rectangle active and mark and open paper 4
paste as a new layer..
add drop shadow.
Make angled rectangle active and mark and open tube of choice
and paste as a new layer, invert and delete.
Duplicate tube layer and make the orginal tube layer active
go to properties and choose luminance legacy.
Move up to duplicated tube layer and go to properties
and choose soft light..
Mark the orginal tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Now go to the duplicated tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Then mark the orginal tube layer again and go to
Xero- Radiance
With these settings: 128 - 50 - 128 - 255
Then mark the duplicated tube layer and
Xero- Radiance
With these settings: 128 - 50 - 128 - 255
Now make the white circle active and
go to Xero - Fritillary
With these settings:
7 - 30 - 12 - 39
Make white circle active
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow
Open element 68 and paste on top of black cirlce layer.
Open element 14 and paste it on top of layer angled rectangle and
blue rectangle.
Open element 18 resize 60% and paste as a new layer on top of
pink circle layer 2.
Open element 22 and paste on top of black circle.
Open element 24 and paste on top of black rectangle were you want it.
Now add the signature and copyright☺
Written by Mel 18 Aug 2012
Bad Reputation
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sweet Music 2" By Toxic Desirez you can find the kit Here
Template 177 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Dk Criss Cross
BillyBop
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make top black square active
mark with your magic wand tool and open paper 11
and paste as a new layer.
Make bottom black square active then mark and open paper 11
and paste as a new layer.
Move up and make top red circle active and open paper 9
and paste as a new layer...
Then move up to bottom red circle and make it active then mark and
open paper 9 and paste as a new layer.
Move up and make top rectangle active and mark and open
paper 2 and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39
Move up and make bottom red rectangle active mark and open paper 2
and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39
Make round rectangle active and flood fill with a light grey color and
open tube of choice and paste.
duplicate the tube layer and mirror it,
duplicate both tube layers.
Make the orginal tube layer active and go to properties and
choose luminance legacy, then go to the duplicated layer and choose
soft light.
Make the duplicated tube layer active and go to properties and
choose luminance legacy, then go to the duplicated 2 layer and choose
soft light.
Now go to xero . radiance
with these settings:
128-50-128-255
Do this to all tube layers.
Make round rectangle active again and go to
VanDer Lee - Unplugged X - Interlace
With these settings: 1-50-50-1-0-50
Move up and make circle layer active and mark and open paper 21
paste as a new layer.
Open frame 1 and paste as a new layer on top
of circle layer.
Open element scatter and paste on background layer as a new layer and
duplicate adn flip it.
Open skull & web element and paste as a new layer behind round rectangle.
duplicate and flip it.
Open speaker and paste as a new layer on top of circle layer into the frame 1.
Open element wire and paste on top of frame1 and under the speaker layer.
open element note circle and paste as a new layer on top balck square layer.
Gradient glow with a red color.
Paste the tube of choice as a new layer and
go to Xero - Radience
This settings: 128-50-128-255
Now add the word art you want.
Signature and copyright and we are done☺
Written by Mel 18 Aug 2012
Homework
*~Supplies Needed~*
Tube of choice i am using the art of Zlata M you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Total Rebel" By Toxic Desirez you can find the kit Here
Template 174 By Kristin Here
Mask of choice i used mask CMC-LinesGrids-mask1 by Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L & K Zitah
*~Font Used~*
Fely
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make top grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39
Make bottom grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39
Make top maroon rectangle active then mark
and open paper 9 and paste as a new layer.
Make bottom maroon rectangle active then mark
and open paper 9 and paste as a new layer.
Make top pink cirlce active mark and open
paper 7 and paste as a new layer.
Make bottom pink cirlce active mark and open
paper 7 and paste as a new layer.
Make top blue rectangle active then mark and open
paper 14 and paste as a new layer.
Make bottom blue rectangle active then mark and open
paper 14 and paste as a new layer.
Make balck round rectangle active, mark and open tube of choice and
paste as a new layer. Use your moving tool to get it were you want it.
Invert and delete, duplicate and mirror.
Duplicate both tube layers again so you have two of both of them.
Go to orginal tube layer 1 and go to properties - luminance legacy
then make orginal tube layer 2 active and go to properties - screen
Go to duplicated tube layer 1 and go to properties - luminance legacy
then make dupøicated tube layer 2 active and go to properties - screen
Go make black round rectangle active and go to
xero-fritillary
with these settings: 7-30-12-39
Now go to top orginal tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50
Then go to top duplicated tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50
Then do this to both top tube layers
go to L and K Zitah
With these settings: 5-33-37-47-69-66-57-32
Now make black circle active then mark and open paper 4
and paste as a new layer.
Now go back and add drop shadow to all the template layers i you did not do it already!
Take film strip and paste it behind the black round rectangle layer
duplicate and flip.
Open sparkles and paste as a new layer on top of the tube layers.
Open frame 2 and paste as a new layer on top of cirlce layer.
Open tube of choice and paste as a new layer on top of circle layer
duplicate and move on top of frame 2.
Use your free hand tool and remove parts of the tubes you do not
want there so it looks like the girl is standing inside frame 2.
Put on some radience if you want to.
Open element flame and paste on top of top and bottom
grey rectangle, duplicate as many times you like
move and flip. i decided at this point to remove both
top and bottom grey rectangles it looked so much better
with only the silver flames=)
Now make background layer active and flood fill with black,
choose a mask and add.
Then add a new reaster layer and flood fill with a light grey color
go to dbs flux- bright noise
these settings: lighter 47
and add the same mask.
then duplicate the black mask layer and mirror it and move both black
mask layer under the silver grey one.
Then add your signature,copyright and we
are done☺
Written by Mel 18 Aug 2012
Saturday, August 4, 2012
Funy Buny
*~Supplies Needed~*
Tube of choice i am using the art of Alfadesire you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Funy Buny" By Toxic Desirez you can find the kit Here
Template 174 By Kristin Here
*~Filter Used~*
used Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Sugar death 2
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at the bottom with top grey rectangle mark and open paper 9
and paste as a new layer...
Move up to bottom grey rectangle mark and open paper 9 again
and paste as a new layer..
Move up to top maroon rectangle mark and open paper 8
and paste as a new layer...
On to bottom maroon rectangle mark and open paper 8 again
and paste as a new layer...
Move up to top pink circle mark and open paper 7
and paste as a new layer...
On to bottom pink circle mark and open paper 7
again and paste as a new layer...
Move up to top blue rectangle mark and open paper 10
and paste as a new layer...
Move on to bottom blue rectangle mark and open paper 10 again
and paste as a new layer...
Now move up to black round rectangle mark and open paper 21
and paste as a new layer..
Delete the layer black circle..
Remember to set drop shadow on all the layers
with these settings :
OV: 2,00
H: 2,00
AB: 50
Blur: 5,00
Color black
to the bottom layers
and
OV: -2,00
H: -2,00
AB: 50
Blur 5,00 color black
to top layers
Now drag the black round rectangle down two layers.
Elements:
Now open film strip and add a new raster layer and flood fill with a color from the kit and move to bottom.
Now take bits of the tube you want to use and paste into the frame as you like.
Then merke down the tube layers and go to properties
screen.
Then go to vanderlee - unplugged x - intelace
with these settings: 1 - 50 - 50 - 1 - 0 - 50
Merge down and paste as a new layer.
Now paste the tube of choice on top as a new layer.
Open bow 1 and resize to 40% paste on the filmstrip mirror it.
Open flame and resize to 70% and paste behind the filmstrip layer.
duplicate and mirror.
Open flower 1-2 and 3 and resize to 28% and paste them behind the filmstrip layer so they showes just on the edge of the filmstrip, duplicate and mirror them to get them as you want..
Open paw print resiza to 37% and paste as a new layer on top of the filmstrip duplicate and mirror...
Open sparkle 1 and paste as a new layer on top of bottom
blue rectangle and duplicate and flip...
Open splatter paste as a new selection on the left side behind the tag
duplicate,mirror,flip until you have coevered the whole background..
Take the word art and paste as a new layer behind the film strip..
Now add signature and copyright and we are done☺
Written by Mel 4 Aug 2012
Friday, August 3, 2012
Devilish Diva
*~Supplies Needed~*
Tube of choice i am using the art of Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Dazzling" By Bibi you can find the kit Here
Template kk 29 By Kandi Kissez
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
Enkis Filter
Dbs Flux
*~Font Used~*
Carbfred
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and mark left frame back and open paper 2
paste as new layer invert and delete.
Duplicate and mirror and delete the right frame black.
Now move up to circle mark and open paper 1
and paste as a new layer.
Delete the polaroids, filmstrip back1, faded strip, film strip 1 layers.
Open element 93 and paste it ob top of the film strip back 2 and 3.
Use gradient glow 3.00
Open Element 16 and paste it on to the circle layer and duplicate and flip it.
Open element 18 and paste on to circle layer.
Open element 24 and paste on circle layer.
Open element 34 and paste onto left frame back duplicate and mirror, duplicate and flip and duplicate and mirror again.
Open element 4 and paste on to left frame back duplicate and mirror.
Open element 62 and paste on to glitterframe were you want it and duplicate and mirror.
Now go to circle and open filter unlimited 2.0 and find enkis filter
and Jon Mullen's Japaese fan and add
Open element 76 and paste on to circle duplicate and flip.
Open element 89 and paste it were you want it.
Now open up the tube of choice and paste it as a new layer.
Go to Xero - Radience
with these settings: 136 - 65 - 107 - 227
Now move the word art were you want it and go to dbs flux - spider web
with these settings: 3 - 6 - 69
Add copyright and signature and we are done!☺
Written by Mel 3 Aug 2012
Endless Summer
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Rock" By Toxic Desirez you can find the kit Here
Template By Slow
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
Vm Distortion
Dbs Flux
*~Font Used~*
Clarck summit
Sugar Death 2
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start with bg layer open filter unlimited 2.0 and go to Vm distortion
Radial pox with these settings: 175 - 99 - 109 - 39
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now move on to 1 and open paper 21 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Open layers 2-3 and 4 and merge down
now mark and open paper 25 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now on to 5 mark and open paper 16 and paste
as a new layer.
On layer 6 mark and open paper 15 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Delete layer 7-8
Go to layer 9 mark and open paper 17 and paste as a new layer.
Got to layer 10 mark and add a new raster layer and flood fill with black
On layer 9 - 10 use gradient glow 3.00 with color hot pink.
Now find a lyric you want and write into layer 10 with a green color from the tube.
Add tube and copyright and
signature and we are done☺
Written by Mel 3 Aug 2012
Subscribe to:
Posts
(Atom)