Profile
Saturday, September 28, 2013
Rebel Devil
*~Supplies Needed~*
Tube of choice i am using the art of Verymany you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sexy Little Devil" By Bibi you can find the kit Here
Template 156 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Arctik
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Delete skulls,pixel words, circle,
Make left circle active and open paper 12 resize to 57% and paste as a new layer.
Make left glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9
Make right circle active and open paper 12 again and resize to 57%
and paste as a new layer.
Make right glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9
Make rectangle left active and open paper 4 and resize to 45% and paste as a new layer.
Make rectangle right active and open paper 4 and resize to 45% and paste as a new layer.
Make glitter rectangle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 46
Lightness: -4
Make wordart 2 active and open paper 4 and paste into selection.
Gradient 3 glow with light grey
Go to VanDer Lee - Unplugged x - Interlace with these settings:
1-50-50-1-0-50 Screen
Then gradient glow again 3 with light grey.
Open tube of chicue and paste as a new layer on top of star2 layer.
Go to xero-radience
With these settings:
13-112-225-181
Open element 20 and paste it behind the tube into the rectangle layer, as amny times you want.
Open element 34 and paste behind the tube on to rectangle 2.
Open element 4 and paste as a new layer behind the tube.
Open element 46 and paste behind the tube.
Add copyright and signature and we are done☺
Written by Mel 28 Sept 2012
Devil Vs Angel
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Devilish by Bibi Collection you can find her amazing kits Here
Template used template 57 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font Used~*
1001head
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Delete layer dottedrect & Dottedcircle & Redbits.
Make black rectangle layer active and open paper 2 and paste as a new layer,invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then make black rectangle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Dkgrayrect active and open paper 8 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make pink circle layer acitve and open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Redrect activeand open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make pink rects active and open paper 6 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make white circle active and open paper 1 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Merge down layers aroow 1 & 2 and add some bright noise to them
with settings: Intensity: 42 Darker
Add some white/black gradient glow to it with 3.00 as width.
Make the left square active and add a new raster layer to it, flood fill with colors of choice
and merge down.
Do this to right square as well.
Now make the word art layer active and flood fill "GOOD" White and the "S" in Vs.
Then flood fill the "EVIL" Black and the "V" in Vs.
Now add some gradient glow to it in Dark Red
Add some bright noise to it as well with same settings as before.
~*Elements*~
Open element 76 and 72 and resize both to 241 x 241, paste the black circle frame on top of the red one, then duplicate it and take them and post over the layers right square and left square to
make frames.
Then open the tubes you wanted to use and resize to fit into the frames, duplicate and delete access. Do this to both right and left square layer.
Go to the right and left square layer and delete left over parts that sticks outside the frames
use your selection tool.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Open element 8 & 9 and resize them to 241 x 241
And paste them were you lie them.
Open element 75 and paste it as a new layer on top of Blackrect.
Make white cirlce active and open element 69 and paste into selection.
Duplicate and flip.
Open element 43 and paste as a new layer on top of left square.
Open element 15 and paste it on top of right square.
Open element 53 and paste on top of layer pinkrects.
Open element 57 resize to 57% and paste behind your tag.
Add copyright, tagname and we are done!
Written by Mel 28 Sept 2013
Friday, September 27, 2013
W.i.t.c.h
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Celine Art you can get the tubes Here
Scrap kit used Witchy by Bibi Collection you can find her amazing kits Here
Template used template 121 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
*~Font Used~*
Forelle
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 2 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 3 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 4 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 5 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 6 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 7 active and open paper 1 (moon) add as a new layer, invert and delete.
make the layer 7 active again,invert and delete.
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
ELEMENTS
Open tube of choice and add as a new layer.
Open element 33 and paste as a new layer on top of layer 7 duplicate and mirror.
Open element 8 and paste on top of layer 5 duplicate and mirror.
Open element 41 resize to 85% and change the color on the frame to black or purple.
Paste it as a new layer.
Open element 56 and paste as a new layer were you want it.
Open element 11 and paste it down in the left corner.
Open element 14 and paste it onto the curtains, duplicate,mirror.
Open element 10 resize to 40% paste it were you want it.
Open element 78 and paste on top of the crystal ball.
Add copyright, tagname and word art and we are done!
Written By Mel 27 Sept 2013
Monday, September 23, 2013
I'll bite you scream!
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Arthur Crowe you can get the tubes Here
Scrap kit used Webbed by Kristin you can find her amazing kits Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Blade 2
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by delete raster 3, copy of raster 8, raster 8, and raster9.
Make raster 7 active and open paper 10 resize to 400 x 400 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer active and use paper 10 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 4 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 4 active and use paper 5 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy (2) of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 2 active nad open paper 6 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
~*Elements*~
Make raster 3 active and open string and paste as a new layer.
Open frame 1 and resize 430 x430 and paste as a new layer on top of the webbed string layer.
Open tube you are going to use and paste as a new layer behind the frame, duplicate and move the other part to the top, invert and delete. Use you selection tool to remove parts out side the frame on the top layer.
Open splatter and paste behind your tag, duplicate,mirror,duplicate,flip,duplicate and flip.
Open sparkles and paste as a new layer on top of your tube layer.
Open bat and resize to 40% and paste it were you like it.
Open flame and resize by 50% and flip it to the left and paste it behind your star frames, duplciate and mirror.
Open lightning rezie by 50% and paste it were you want it, duplicate and mirror.
Open rose resize by 50% and paste them were you want it.
Open wire and paste as a new layer on top of raster 5 duplicate,mirror.
Add the words "I'll bite you scream"
Add copyright and tagname and we are done!
Hope you enjoyed my tutorial☺
Written by Mel 23 Sept 2013
Friday, September 20, 2013
The lady is a vamp
*~Supplies Needed~*
Tube of choice i used the gorjuss art of The Hunter you can get the tubes Here
Scrap kit used Twilight by Bibi Collection you can find her amazing kits Here
Template used Vamp temp by Justine, you can download it over at the Misfit blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Taggetes
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make the copy of raster 3 active and open paper 1 and paste as a new layer, invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Now make copy of raster 3 part 2 active and open paper 9 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 9 active and open paper 7 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster 6 active and open paper 10 and resize to 400 x 400 and paste as a new layer, invert and delete.
Make the copy of the vector layer 1 active and open paper 8 resize to 600 x 600 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 7 active and open paper 6 and resize to 400 x 400 and paste as a new layer,invert and delete.
Make the copy of vector 1 part 2 active and open paper 10 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Delete raster 3.
Now open up the tube ofchoice and paste as a new layer.
Add some radience to it with these settings:
128 - 50 - 128 - 255
~*Elements*~
Open element 17 and paste behind your tag duplicate it,mirror it and flip it to you got one in every corner of your tag.
Open element 16 and paste it behind raster 9, duplicate and flip.
Open element 18 rotate it to the left and paste it behind the raster 9.
Open element 25 and paste it on top of raster 9.
Open element 27 and paste as a new layer on top of raster 9.
Open element 30 and paste as a new layer were you want it.
Open element 31 and resize it to 151 x 149 and paste it as a new layer into the first frame picture then promote to layer and remove the parts that sticks outside the frame with your selection tool.
Open element 32 resize it to 448 x 248 and paste it behind raster 9 and let the curten show in bottom of raster 9.
Then duplicate and mirror, then dulpicate and flip.
Make raster 7 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Make raster 8 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Open element 48 resize it to 40% and paste it were you want it.
Open element 50 resize to 50% and paste it on the bottom of your tag duplicate, mirror and move to bottom.
pen element 68 and paste it on top of your tube layer, duplicate and mirror.
Open element 83 resize to 50% then paste it were you want it.
Open element 97 resize to 80% then paste it behind the rip stone.
Now add copyright, tag name and we are done!
Hope you enjoyed my tutorial :o)
Written by Mel 20th Sep 2013
Tuesday, September 17, 2013
Do you like my pumpkins
*~Supplies Needed~*
Tube of choice i used the cool art of Danny Lee you can get the tubes Here
Scrap kit used Halloween Pumpkin by Bibi Collection you can find her amazing kits Here
Template used template 275 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Vm Distrotion - Broken Mirror
*~Font Used~*
Anderson The Mysterons
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by making layer 1 active and open paper 8 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 2 active and open paper 5 and paste as a new layer,invert and delete.
add bright noise to it with these settings:
Intesity: 35
Mix
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate and mirror
move so only the gradient glow we made shows outside layer 3 when you are happy
delete layer 3.
Make layer 4 active and open paper 7 and paste as a new layer,invert and delete.
then before you merge down make layer 4 active again and open paper 1 and paste as a new layer,invert and delete.
Now go to the layer with the orange paper and add some bright noise to it.
With these settings:
Intensity: 40
Lighter
Then move to the green paper layer and go to your filter "Vm Distrotion - Broken mirorr
with these settings: 16 - 16 - 16 - 92 - 0 - 92
Then we are going to add some fritillary to it by going to our Xero filter - Fritillary
With this settings: 5 - 30 - 10 - 0
Now make layer 4 active again and a
add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 5 active and open paper 7 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00
Soft corners: 25%
Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it when you only see the gradient glow
outside the layer 6 delete the layer 6.
Make layer 7 active and open paper 2 resize to 500 x 500 and paste as a new layer, invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it, when you only see the gradient glow outside the layer 8 delete layer 8.
Delete layer 9 and 10.
~*Elements*~
Open element 8 and paste it on top of layer 7 into the corner of the first square, duplicate and mirror.
Open element 1 and paste it on top of layer 7, use your selction tool and remove the bottom of the element so it looks like it stick through the frames.
Duplicate and mirror.
Open element 18 and paste on top of layer 5 in the corner to the top, duplicate,mirror.
add some sahdow to it. duplicate and flip,then duplicate and mirror.
Open element 22 and paste it on top of layer 4.
Open element 29 and paste it on top of the fence layer.
Open element 32 and paste in to top of layer 4 duplicate and flip.
Open element 33 and resize it to 67% and paste it as a new layer on top of layer 4
Open element 36 and paste it on top of layer 1 and duplicate mirror,duplicate and flip. do this until you have it in all 4 corners in back of your tag.
Now open the tube and paste it as a new layer.
Open element 48 and paste it on top of tube a few times to make it pop!
Open element 64 resize to 52% rotate it 90 to the left and paste it on the side of the frame layer. duplicate and mirror.
Open element 34 resize to 50% then paste it on your tag were you want it.
duplicate and mirror.
Now add the text " Do You Like My Pumpkins"
Add copyright and tag name and we are done!
Written by Mel 17th Sep 2013
Sunday, September 15, 2013
Little Boo
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Silly Monsters 2" By Toxic Desirez you can find the kit Here
Template 185 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Amal
Let us start!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 13 and paste as a new layer.
Make bottom rectangle active and open paper 13 and paste as a new layer.
Make top square active and open paper 12 and paste as a new layer.
Make bottom square active and open paper 12 and paste as a new layer.
Make black top rectangle active and open paper 14 and paste as a new layer.
Make black bottom rectangle active and open paper 14 and paste as a new layer.
Make circle active and open paper 6 and paste as a new layer.
Make rectangle active and open paper 20 and paste as a new layer.
Open filmstrip and add a new raster layer and flood fill with white and
move to bottom.
Open tube and take 4 parts of the tube and paste into the filmstrip.
Merge all tube layers down and go to properties and choose luminance legacy
duplicate, choose soft light.
Go to the white layer and go to vanderlee - unplugged x - interlace
with these settings:
1-50-50-10-50
Normal
Then on both tube layers
go to xero- radience
With these settings:
128-50-128-255
Open wordart 1 and paste as a new layer on top of circle layer.
Open swirl 1 resize to 70% paste on top of bottom square layer
duplicate and mirror it.
duplicate again and flip and duplicate and mirror.
Open web resize to 63% and paste it on top of rectangle.
duplicate and mirror it, duplicate adn flip and duplicate and mirror.
Open sparkles and paste as a new layer on top of rectangle.
Open frame 4 and resize to 90% and paste as a new layer on top of circle.
Open flame paste on top of rectangle duplicate and mirror it.
Open claws resize to 55% and paste on top of circle.
Open tube of choice and and paste as a new layer.
Add copyright and signature and we are done☺
Written by Mel 15 Sept 2012
Friday, September 13, 2013
Queen of the night
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Voodoo Cutie 2 by Kristin you can find her amazing kits Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
Xero - Radience
*~Font Used~*
Mirella Script
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy of raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make the copy of raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some brisght noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 1 active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy (2) of raster layer active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make raster layer 2 active and open paper 1 and paste as a new layer,invert and delete.
Lets add some fritillary to it by going to our Xero filter and choose Fritillary
With these settings:
5- 30 - 10 - 0
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 9 active and change the color to black.
Merge down raster 8 and copy of rater 8 and make the merged layer active open paper 11 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 3 active and add a new raster layer, flodd fill with a dark brown.
Now lets add some bright noise to it with these settings:
Intensity: 50 Mix
~*Elements*~
Open frame 3 and paste as a new layer on your tag.
add some bright noise to it with these settings:
Intensity: 50
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Open filmstrip and add some radience to it with these settings:
126 - 50 - 125 - 255
add a new raster layer to it flood fill with a color you want and move to bottom.
Add 2 parts you like from your tube into the windows of the frame.
then open the doll and resize yo 40% and paste into the 2 other windows.
Merge down the layers with the tubes in and go to properities choose luminance legacy.
Then add some radience to it with these settings:
128 - 50 - 128 - 255
Copy merged and paste as a new layer on top of your tag.
Open frame 2 and paste it on top of the frame 3 layer.
Open flame resize to 40% and paste on top of the frame 3 layer on to in each corners.
then flip them.
Open splatter and paste as a new layer behind the whole tag, duplicate and mirror, duplicate and flip and duplicate and mirror.
Open swirl and paste as a new layer ontop of the raster 3 duplicate and mirror.
Open tube of choice and paste as a new layer.
Open sparkles and paste on top of the tube layer.
Add copyright, name and words of choice and we are done!
Hope you enjoyed my tutorial.
Written by Curiouz 13th Sep 2013
Alice in wonderland
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Alice by Bibi Collection you can find her amazing kits Here
Template used template 103 by Millie, you can download it on her blog Here
Mask of choice but I used Cmc _linesgrids-kristin-mask-5 by Kristin
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Alice in Wonderland
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and open paper 9 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 3 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 4 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 5 active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 6 active and open paper 4 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Merge down layer 7 & 8 and make the merged layer active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45 Mix
*Elements*
Open element 102 and paste as a new layer on top of layer 10.
Open element 3 and paste as a new layer in the bottom of your tag behind all layers so it looks like a floor.
Open element 52 resize 50% and paste as a new layer on top of layer 9.
Open element 99 and paste as a new layer on top of layer 9.
open element 76 resize 60% paste it were you want it.
open element 75 resize to 60% and paste it were you want it.
open element 68 paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
open element 63 resize to 60% paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
Open element 6 and paste as a new layer on top of the layer 12 into the circle frames, duplicate then mirror.
open element 59 resize to 50% and paste as a new layer on top of layer 10 duplicate and mirror.
open element 50 and paste it were you want.
Open element 2 resize to 50% and paste it on top of layer 10 duplicate and mirror.
open element 126 and resize to 50% place it on top of layer 12 to the left then duplicate and mirror.
Open element 112 paste behind your tag duplicate and mirror so you get on sticking from each
corner behind your tag.
Open element 98 resize to 50% and paste it were you want on the tag.
Open your tube of choice and paste as a new layer on to your tag.
add some radience by going to your filter Xero - Radience
These settings:
233 - 158 - 63 - 206
open element 16 and paste on top of your tube
Now open a new raster layer flood fill with black use the mask of choice and paste it behind your tag.
Add the words "Well, when I was lost, I suppose it's good advice to stay where you are until someone finds you. But who'd ever think to look for me here?"
Add copyright, tagname and we are done!☺
Written by Mel 13th Sep 2013
Thursday, September 12, 2013
Very Important Princess
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Marc Duval you can get the tubes Here
Scrap kit used Lost Princess by Bibi Collection you can find her amazing kits Here
Template used template 106 by Millie, you can download it on her blog Here
*~Filter Used~*
*~Filter Used~*
Eye Candy 4 - Gradient Glow
VanDerLee-Unplugged X- Interlace
Xero - Fritillary
Dsb Flux - Bright Noise
*~Font Used~*
LainieDay
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by merge down layer 1 and 2.
Then make layer 1 active and open paper 9 and paste as a new layer, invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are going to add some gradient glow to with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Move the arrow to alsmost full to get a compact color.
Then we are going to add some bright noise to it so we make only the border we made active with the magic wand and we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Lighter
Now make layer 3 active and open paper 6 and paste as a new layer, invert nad delete.
We are adding some bright noise to this layer so we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Lighter
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31
Lighter
Now make layer 4 active and open paper 6 and paste as a new layer, invert and delete.
We are adding some bright noise to this layer so we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Mix
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then add some bright noise to the border with the same settings.
Delete layer 5.
Merge down layer 6 and 7 .
Make the layer 6 active and open paper 9 and paste as a new layer,invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31
Lighter
Merge down layer 8 and 9.
And make the layer 8 active and open paper 6 and paste as a new layer, invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31 Lighter
~*Elements*~
Open element 1 and resize by 60% and paste as a new layer on top of layer 4
add some radience to it by go to your filter Xero - radience with these settings:
128 - 50 - 128 - 255
Open element 17 and paste on top of the layer 6 behind the circles duplicate and mirror.
Open element 18 resize to 500 x 500 and paste onto of the layer 6 over the castle.
Open the element 30 and paste as a new layer on top of layer 8 duplicate flip.
Open element 39 and paste as a new layer ontop of layer 1 duplicate mirror , duplicate and flip and duplicate and mirror.
Open element 8 and paste as a new layer on top of layer 8.
Open element 78 and paste behind the whole tag on a new layer add some bright noise to it and duplicate and flip.
Add word art, tag name and copyright and we are done!
Hope you enjoyed my tutorial☺
Written by Mel 12th Sep 2013.
Wednesday, September 11, 2013
Totally Emo
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Alehandra Vanhek you can get the tubes Here
Scrap kit used Totally Emo by Kristin you can find her amazing kits Here
Template used template 167 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Xero - Radience
Dsb Flux - Bright Noise
*~Font Used~*
Sick Capital Vice
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make the dotted rectangles layer active and change the purple to a blue that matches your kit, then merge down.
Make the circle right layer active and open paper 19 and paste as a new layer, use your moving tool to get it as you want, invert and delete and merge down.
Now make the circle left layer active and open paper 19 again and paste as a new layer, use your moving tool to get it as you want then hit delete and merge down.
Make the circle right active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, then make the gradient glow layer active and add some bright noise to it with the settings:
Intensity 45 Direction Mix
Make the circle left active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, then make the gradient glow layer active and add some bright noise to it with the settings:
Intensity 45 Direction Mix
Make the rectangle right active and open paper 12 and paste as a new layer, invert and delete.
Make the rectangle right active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, then make the gradient glow layer active and add some bright noise to it with the settings:
Intensity 45 Direction Mix
Make rectangle left layer active and open paper 12 and paste as a new layer, invert and delete.
Make the rectangle left active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, then make the gradient glow layer active and add some bright noise to it with the settings:
Intensity 45 Direction Mix
"Do this for every layer to add the border"
Make the long rectangle right layer active and open paper 13 and paste as a new layer, invert and delete.
Add the border with the gradient glow and bright nois as before.
Now make the long rectangle left layer active and open paper 13 and paste as a new layer, invert and delete.
Add the border with the gradient glow and bright nois as before.
Make the round rectangle left active and open paper 24 and paste as a new layer,invert and delete.
Make the round rectangle left active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, add some bright noise to the whole layer with the settings:
Intensity 45 Direction Mix
Make the round rectangle right layer active and open paper 24 and paste as a new layer,invert and delete.
Make the round rectangle right active add some gradient glow in the color you want with the settings:
3.00 width 25% Soft corners Opacity: 100%
move your arrow on color to full so you get a hard black, add some bright noise to the whole layer with the settings:
Intensity 45 Direction Mix
Now make the circle layer active and open paper 11 and paste as a new layer, invert and delete.
~*Elements*~
Open filmstrip and add a new raster layer to it then move it to the bottom, flood fill it with the color you prefer. Take parts of the tube you like and paste them into the frames.
Now merge all the tube layers you have down to one and right click and go to properties and add luminance legacy.
Then add radience with these settings:
128 - 50 - 128 - 255
merge all layers and copy merged and add as a new layer on the bottom of your tag.
Take the tube of choice and paste it on top of the filmstrip and delte acess that shows outside.
Add radience to the tube with these settings:
128 - 50 - 128 - 255
Open the word art and paste as a new layer on top of the circle layer, add some black gradient glow to it.
Then open the wire and paste it as a new layer behind the word art.
Open star trail and paste as a new layer behind the circle layer, add a weak black glow to it.
Open sparkles and paste as a new layer on top of the filmstrip duplicate and flip.
Now add copyright and name and we are done!
I hope you enjoyed my tutorial☺
Written by Mel 11th Sep 2013
Monday, September 9, 2013
Get what you want
*~Supplies Needed~*
Tube of choice i am using the art of Verymany you can buy the tubes Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sweet Emo" By Bibi Collection you can find her kits Here
Template 72 By Millie Here
*~Filter Used~*
Xero
Unplugged X
Eyecandy4000
Dsb Flux
*~Font Used~*
Jellyka Love and passion
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by making layer 1 active then open paper 15 and paste as a new layer, invert and delete.
Then add some black gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin.
Now make layer 2 active and open paper 11 and paste as a new layer, invert and delete.
Then add some black gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin.
Make layer 3 active and open paper 6 and paste as a new layer, invert and delete.
Then add some black gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin.
Make layer 4 active and open paper 4 and paste as a new layer, invert and delete.
Then add some black gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin
Merge down layer 5 & 6 then make the merged layer active and open paper 10 and paste as a new layer, invert and delete.
Then add some black gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin.
Merge down layer 7 & 8 and make them active, add a new raster layer and flood fill with black.
Take parts you want from the tube and paste it into the layer you merged down, use your moving tool so you get it as you prefer.
Duplicate the layers and go to properties choose luminance legacy.
Now use the plugin L en K Zitah with these settings:
5- 33- 37 - 47 - 69 - 66 - 57 - 32
Now make the circle frames active and add grey gradient glow with 3.00 in width and almost full on color.
add some bright noise to it with dsb flux plugin.
Open you tube of choice and add as a new layer.
Elements
Open element 23 and resize 50% and paste as a new layer on top of background layer.
Open element 51 and paste as a new layer on top of layer 4.
Open element 82 and paste on top of the faces in the circle frames.
Open element 2 and paste as a new layer on top of layer 2.
Open element 46 and paste as a new layer on top of layer 2.
Open element 39 and paste as a new layer on top of layer 4.
Open element 38 and paste on top of layer 7.
Use font of choice and word art and copyright and tag name and we are done!
Hope you enjoyed my tutorial.
Written by Mel 9th Sept 2013
Sunday, September 1, 2013
Cute spook
*~Supplies Needed~*
Tube of choice i am using the art of Elias Chatzoudis you can buy the tubes Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Wycked Witch" By Toxic Desirez you can find her kits Here
Template Halloween Template3 By Kristin Here
*~Filter Used~*
Eyecandy4000
Xero
Dsb flux
*~Font Used~*
Xirwena
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make layer "circle left active and open paper 21 and paste as a new layer, invert and deleteand merge down.
Add now add gradient glow to it with these settings:
Glow width: 3.00
Opacity: 100%
Soft corners: 25
Color: Black
Drag the arrow so it almost full to make the color stronger.
Now make the layer "circle right" active and open paper 21 and paste as a new layer, invert and delete and merge down.
now add gradient glow to it with these settings:
Glow width: 3.00
Opacity: 100%
Soft corners: 25
Color: Black
Drag the arrow so it almost full to make the color stronger.
Make the layer "Yellow Rectangle" active and open paper 20 and paste as a new layer, invert and delete and mege down.
now add gradient glow to it with these settings:
Glow width: 3.00
Opacity: 100%
Soft corners: 25
Color: Black
Drag the arrow so it almost full to make the color stronger.
Make layer "Orange Rectangle" active and open paper 16 and paste as a new layer, invert and delete and merge down.
now add gradient glow to it with these settings:
Glow width: 3.00
Opacity: 100%
Soft corners: 25
Color: Orange
Drag the arrow so it almost full to make the color stronger.
Make the layer "White glitter circle" active and flood fill with a purple color.
add bright noise by using the dsb flux with these settings:
Intensity: 48
Mix
Now make the "Black rectangle 1" layer active and flood fill with a orange color.
add bright noise by using the dsb flux with these settings:
Intensity: 48
Mix
Make "glitter circle orange" active and flood fill with a purple color .
add bright noise by using the dsb flux with these settings:
Intensity: 48
Lighter
Now go to the layer "pixel word" "view current only"
go to layer - new adjustment layer - hue/saturation/brightness
With these settings:
Edit: Yellow
hue: -163
Saturation: 33
Lightness: -19
Remove raster layer 5 or less you want the stars.
Open tube and paste as a new layer. Adjust with the moving tool so you get it were you want.
Go to your Xero pluging and add Radience with these settings:
128 - 50 - 128 - 255
Elements
Open filmstrip add a new raster layer flood fill with color of choice.
Take 4 parts from the tube you like and place it into the frame as you like.
Merge the tube layers down and duplicate, then go to the original layer first then go to
properties - luminance legacy.
Now go to the layr you duplicated then properities - soft light.
Then go to your xero plugin and radience with these settings:
125 - 56 - 102 - 173
Gopy merged and paste as a new layer behind your tube on the tag.
Open web and resize to 80% and paste on top of the black circle 2 layer.
Open splatter and paste it behind your tag duplicate and mirror, duplicate and flip.
Open books resize to your preference, and paste them near the tubes knees.
Open bat and resize and paste on top in the left circle.
Open sparkels and resize to 40% and paste it were you prefer.
Open wordart 2 and paste as a new layer on top of yellow rectangle.
Now add copyright - name and we are done.
Hope you enjoyed my tutorial.
Written by Mel 1 Sept 2013
Subscribe to:
Posts
(Atom)