Profile
Friday, October 25, 2013
Drama Llama
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Zlata M you can get the tubes Here
Scrap kit used Drama Llama by Bibi Collection you can find her amazing kits Here
Template used template 72 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font i used~*
Apantasia
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Delete layers 8,7,6 and 5.
Make raster 1 active and open paper 9 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 2 active and open paper 11 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 3 active and open paper 5 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 4 active and open paper 4 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Open tube of choice and paste as a new layer on top of raster 4.
~*Elements*~
Open element 13 and paste in the back of your tag, duplicate and move around until you
get the result you are looking for.
Open element 25 and paste as a new layer on top of layer 4 to the left.
Open element 30 and paste it to the back of your tag, duplicate and mirror until you get it
as you want.
Open element 42 and paste it on to raster 4 dulpicate and mirror, and duplicate and mirror again.
Open element 46 and paste on to the tube layer.
Open element 48 and paste it were you want it.
Open element 52 and resize to fit back of your tag, duplicate and flip it.
Open element 61 and paste as a new layer, duplicate and mirror...
Open element 62 and paste on to the tube layer to the left.
Open element 79 and paste as a new layer were you want it.
Add copyright, tagname and we are done!
Written By Mel 25th Oct 2013
Tuesday, October 22, 2013
I Must Feed
*~Supplies Needed~*
Tube of choice i used the scary art of Xeracx you can get the tubes Here
Scrap kit used Pumpkin 2 by Kristin you can find her amazing kit Here
Template used template 233 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
VanDerLee-Unplugged X - Interlace
*~Font i used~*
Grave Digger
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 9 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Now make copy of raster 9 active and use paper 4 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 8 active and open paper 6 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 8 active and use paper 6 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make copy of raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make raster 5 active and open paper 8 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and lighter.
Now make the raster 5 layer active again and go to eyecandy4000 - fire and add some fire effect to the layer with these settings:
Direction: 90
Column Length : 150
Flame Width: 15
Movement: 33
Check denser flames
Duplicate the layer and flip.
Make copy of raster 3 active and invert the colors.
Make raster 3 active and add a new raster layer to it and flood fill with white.
Merge down.
Take some parts of your tube of choice and paste in to the raster 3 layer.
Duplicate and mirror. Then go to properties and add some lumincance legacy to it,
duplicate again and go to properties again and add some screen to it.
Then go to VanDerLee and add some interlace to it with the settings you prefer.
Now make copy of raster 2 layer active and invert the color on it.
Then move up to raster 2 and make it active and open paper 1 and paste as a new layer.
~*Elements*~
Open frame 3 and resize to 450 x 450 and paste as a new layer on top of the raster 2 layer.
Open web and duplicate and merge down, add some gradient glow to it in color you prefer and flip it,paste it as a new layer on top of copy of raster 3.
Open splatter and paste as a new layer behind your tag, duplicate and move around as you like.
Open lights and resize to 677 x 63 and paste on top of the web.
Open swirls and resize to 40% and paste into the frame duplicate and mirror.
Open your tube and paste it on top of your tag.
Open sparkles and paste as a new layer over the tube.
Open pumpkin 2 and paste it to the right down beside your tubes feet.
Add these words " I Bite You Bleed, You May Scream But I Must Feed"
Now add copy Right and tag name and we are done!
Written By Mel 22th Oct 2013
Tuesday, October 15, 2013
Bloody Kiss
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Barbara Jensen you can get the tubes Here
Scrap kit used Zombiefied by Kristin
you can find the kit Here
Template used template 208 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Xero - Radience
VanderLee - Interlace
Dsb Flux - Bright Noise
*~Font i used~*
Drakon
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 12 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
(But this is optinal)
Make copy of raster 12 active and use the paper 5 again and paste it as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 11 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 11 active and open paper 4 again and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 6 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 1 active and open paper 1 and paste as a new layer,invert and delete.
Make raster 3 active and add some bright noise with these settings: intensity 35 Darker
Make copy of raster 13 active and add a new raster layer and flood fill with red and add some bright noise with these settings: intensity 35 Darker.
Make raster 14 active and open paper 1 and paste as a new layer.
add some gradient glow to is this time use color white and same settings as before.
~*Elements*~
Open web and paste it as a new layer on top of raster 13.
Open brad and paste it behind both raster 11.
Open city and paste as a new layer behind raster 5.
Open frame 3 and paste as a new layer on top of raster 13.
Open splatter and paste as a new layer move to bottom, duplicate and mirror as you like.
Open the tube of choice and paste as a new layer were you want it.
Open sparkles and paste on top of your tube.
Now add the words
"Take me from this earth an endless night
this, the end of life.
From the dark I feel your lips
and taste your bloody kiss."
Add copyright and tagname and we are done!
Written By Mel 15th Oct 2013
Saturday, October 12, 2013
Toxic Waste
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Toxic by Bibi Collection you can find her amazing kits Here
Template used template 115 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font Used~*
A Stitch Plus Ninie
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by delete these layers: "Black dot,Black frame,White square, black rectangle and white rectangle. (these are the ones that are small) Lt yellow square 1 and 2.
Now make Lt yellow square4 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Now go to the next layer and make the Lt yellow square3 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
The next layer is Lt yellow circle3 go on and make it active and open paper 8 and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make Lt yellow circle2 active and use paper 8 again and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make black dotted circle 3 active and add a new raster layer and floodfill with yellow.
add some bright noise to it same settings as before.
Do this to dotted cirlce 2 as well.
Make black circle 2 active and open paper 6 and paste as a new layer,invert and delete.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to the whole layer (the paper layer and border)it as well with the intensity 35
Make yellow rectangle active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Make the Lt yellow circle active and open paper 9 and paste as a new layer and invert and delete.
Make the yellow circle active and add some bright noise to it same settings as before.
Make the black rectangle actvie and open paper 6 paste as a new layer, add gradient glow to it in yellow, then add bright noise to the whole layer, then add some bright noise to the yellow frame to.
~*Elements*~
Open element 86 and paste as a new layer on top of you tag.
Open element 12 and paste it on top of the black rectangle layer, duplicate it to you have 4
and place them next to eachother.
Then open element 2 and paste on top of them.
Open element 21 and paste it on top of the tellow frame layer.
Open element 20 and paste it as a new layer behind the black rectangle layer.
Open element 3 and paste it as a new layer on top of the black rectangle layer.
Open element 34 and resize it 40% paste it to the left side corner in the bottom of your tag.
Open element 16 and resize it 50% and paste on top of the element 34.
Open element 7 and paste behind all layers, duplicate and mirror.
Open element 30 and resize to 50% and paste it down in the corner with the lizard and barrel.
Open element 40 and paste as a new layer on top of the yellow frma layer.
Open element 50 and paste it behind your tag, duplicate and flip.
Open element 53 and paste it on top of yellow frame layer.
Open element 59 and paste it behind the toxic word frame and duplicate and mirror.
Open element 6 and paste it down in the left corner of your tag together with the lizard,barrel and ammo.
Add the words"I've turned down so many people that would treat me like a queen and I run back to the person that's the most toxic for me." with the fornt of choice.
Now add you tube of choice and copyright and tagname and we are done.
Written by Mel 12 Oct 2013
Wednesday, October 9, 2013
Too cute too spook
*~Supplies Needed~*
Tube of choice i used the cute art of Alfadesire you can get the tubes Here
Scrap kit used Trickster by Kristin you can find her amazing kits Here
Template used halloween template 3 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright noise
Xero - Radience
L en K - Dimitri
Unplugged X - Interlace
*~Font Used~*
The loyalist
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
delete raster5.
delete words 1 and 2.
Make circle left active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make circle right active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make yellow rectangle active and open paper 21 and paste as a new layer,invert and delete.
add some bright noise to the yellow rectangle with the settings you prefer.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make orange rectangle active and open paper 7 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make white circle active and open paper 17 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make pixel word layer active and change the color to a darker orange color.
~*Elements*~
Open filmstrip and add a new raster layer, floodfill with black.
Move the floodfilled layer to bottom.
Now takes parts from the tube you are going to use and paste them as a new layer on to the black layer as a new layer, use your selection tool and remove access bits.
Then go to properties - luminance legacy and add some radience to it as well with these settings: 33- 84 - 194 - 151
Then go to L n K filter and use the Dimitri filter with these settings:
control: 5
Then we are going to add some interlace to it as a finish touch, go to your unplugged x filter and
choose interlace with these settings:
1- 50 - 50 - 1- 0- 50
transparency: 0
Normal
Then add a new raster layer this time white and move to bottom and merge down.
Add this on top of your tag.
Open splatter and paste as new layer, move to bottom and duplicate and rearrange as you like.
Open sparkles and paste as a new layer on top of the filmstrip.
Open house and paste it behind the filmstrip layer, then let only the roof of the house stick out on the top of the layer. Delete the bottom part.
Open lights and paste them in the bottom of the filmstrip.
Take the tube of choice and paste it on to your tag.
Open frame 4 and paste as a new layer behind black rectangle 1.
add some gradient glow to it.
duplicate and flip.
Open doodle 2 and paste as a new layer behind filmstrip.
Add the words "Too Cute Too Spook" with font of choice
add copyright and tagname and we are done!
Hope you enjoyed my tutorial☺
Written by Mel 9th Oct 2013
Tuesday, October 1, 2013
Vengeance
*~Supplies Needed~*
Tube of choice i am using the art of Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Toxic Terror" Kristin
(exclusive misfit kit)
Exclusive TPP Template By Kristin
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Amal
Let us start!
Open up the template shift + d to duplicate it and close out the original.
Make pink top rectangle active and open paper 20 and paste as a new layer.
Make pink bottom rectangle active and open paper 20 again and paste as a new layer.
Make top circle active and open paper 8 and paste as a new layer.
Make bottom circle active and open paper 8 again and paste as a new layer.
Make blue top rectange active and open paper 6 and paste as a new layer.
Make blue bottom rectangle active and open paper 6 again and paste as a new layer.
Make top square active and open paper 10 and paste as a new layer.
Make bottom square active and open paper 10 and paste as a new layer.
Make oval active and open paper 7 and paste as a new layer.
Remember to add shadow to all layers.
Frame
Open filmstrip add a new raster layer floodfill with color of choice
and move to bottom.
Now take the parts you want from the tube you are going to i use and paste it into to the frame 4 times.
Then merge the tube layers down and
go to xero - radience
with these settings:
128-50-128-255
Then go to background and go to
VanDer Lee - Unplugged X - Interlace
With these settings:
1-50-501-0-50
Normal
Then merge all layers and paste as a new layer on to template.
Elements
Open bow2 resize to 40% and paste it were you want it.
Open charm and paste under the bow2.
Open sparkle and paste as a new layer onto oval layer.
Open splatter paste as a new layer on top oval layer.
Open web resize to 55% paste behind filmstrip and duplicate and flip it.
Open spider and resize to what you like and paste as a new layer on top of the web.
Now add signature and copyright and we are done☺
Written by Mel 1 Oct 2012
Subscribe to:
Posts
(Atom)