Profile
Thursday, September 27, 2012
I only look innocent
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Princess" By Toxic Desirez you can find the kit Here
Template By JEK Creations Here
*~Filter Used~*
EyeCandy4000
*~Font Used~*
Andyfish
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove credit and R6 layers.
Make R11 active and open paper 6 and paste as a new layer.
Make R9 active and open paper 6 again and paste as a new layer.
Now make R5 active and open paper 8 and paste as a new layer.
Make R4 active and open paper 16 and paste as a new layer.
Make R3 active and open paper 16 again and paste as a new layer.
Make R2 active and open paper 9 and paste as a new layer.
Open tube of choice and paste it as a new layer.
Open wire and paste it as a new layer on to R2
Open frame 2 and paste it as a new layer on to R2 over the wire.
Open chain 2 and resize to 52% and paste it right behind the tube.
Open divider and paste as a new layer on to R5 and duplicate and flip.
Open sparkles and paste as a new layer on to R1.
Add a new raster layer and move to bottom, open a paper from the kit and mask it with the mask of choice.
Now add copyright and signature and we are done☺
Written by Mel 27 Sept 2012
Thursday, September 13, 2012
Autumn Notes
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!
Scrap Kit used "Autumn notes" By Bibi you can find the kit Here
Template halloween templae 3 By Kristin Here
*~Filter Used~*
used Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Amal
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make circle left active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0
Make circle right active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0
Make yellow rectangle active and go to
dbs flux - bright noise
with these settings:
intensity:38
Mix
Make orange rectangle active and open paper 1 again and paste as a new layer.
Go to VanDer Lee- Unplugged X- Interlace
With these settings:
Screen
1-50-50-1-0-50
Make glitter circle orange active
go to layers- new adjustment layer
hue/saturation/lightness
With these settings:
Master
hue: 23
Saturation:63
Lightness:31
Open up tube of choice and paste it were you want it.
Open element 1 and paste behind tube.
duplicate and mirror it.
Open element 15 and paste on top of black circle.
Open element 20 and paste on top of orange rectangle, duplicate
and mirror it.
Open element 44 and paste behind tube.
Open element 52 resize to 48% and paste it behind the tube on orange rectangle layer.
duplicate and mirror it.
Open element 31 and paste it on top of circle layers duplicate flip and mirror it.
Open element 18 and paste it with the tubes waist.
Now add coyright and signature and we are done☺
Written by Mel 13 Sept 2012
Tuesday, September 11, 2012
Trick er treat
*~Supplies Needed~*
Tube of choice i am using the art of Elias Chatzoudis you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Trick or treats" By Bibi you can find the kit Here
Template Halloween template 7 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Andyfish
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove circle 1 layer,
Make circle right active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50
Make circle left active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50
Make left square active and choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35
Make right square active choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35
Make cirlce 2 active and choose a blue color from paper 4 and flood fill with it.
Make rectangle active and flood fill with purple color from paper 4
Then go to Xero- Fritillary
with these settings: 5-30-25-35
Now make pixel words layer active and make text black.
Then make dotted circle 2 active and make it black as well.
Open tube of choice and paste it as a new layer on to circle 2.
Open element 7 and paste it as a new layer on dotted circle layer.
Open element 74 and paste on to both circle right and left.
Open element 11 and paste it on both sides of the tube.
Open element 26 and paste it of top of left and right squares.
Open element 6 resize to 77% and paste as a new layer on top of the tubes waist.
Open element 54 and paste as a new layer on top of rectangle.
Open element 70 and paste on to rectangle on both sides of the tube.
Open element 72 and paste it on top of rectangle and duplicate and mirror it.
Now add copyright and signature and we are done☺
Written by Mel 11 Sept 2012
Saturday, September 1, 2012
Rock'N Roll
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Music Is My Life" By Toxic Desirez you can find the kit Here
Template 183 By Kristin Here
Mask of choice
*~Filter Used~*
Xero
Dbs flux
EyeCandy4000
*~Font Used~*
Lino Chisel
Tangerine
Let's Start!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 14 and paste as a new layer.
Make bottom rectangle active and open paper 14 again and paste as a new layer.
Make the white top rectangle active and open paper 8 and paste as a new layer.
Make bottom white rectangle active and open paper 8 and paste as a new layer.
Make grey top rectangle active and open paper 10 and paste as a new layer.
Make grey bottom rectangle active and open paper 10 and paste as a new layer.
Make grey top square active and open paper 9 and paste as a new layer
Make bottom grey square active and open paper 9 and paste as a new layer.
Make dark grey top rectangle active and open paper 23 and paste as new layer.
Make dark grey bottom rectangle active and open paper 23 and paste as new layer
Make circle active and open paper 26 and paste as a new layer.
Elements:
Open star circle and paste as a new layer behind the circle.
Open frame 1 and paste as a new layer on top of circle layer.
open cd and paste as a new layer under frame.
Find a lyric you like and paste onto cd layer.
Open sparkles and paste as a new layer on to the cd layer.
OPen music note star resize to 50% paste were you want it.
Paste tube of choice as a new layer.
Now with the font of choice and size 48 write Rock'n Roll
Use gradient glow if you want to.
Then take the font of choice for signature and write name in over the
rock'n roll text.
Now go to background layer and flood fill with color of choice and add mask
of choice.
Add copyright and we are done☺
Written by Mel 1 Sept 2012
I Make Boys Cry
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Toxicity" By Toxic Desirez you can find the kit Here
Template Emo misfits temp 2011 By Kristin Here
Mask of choice
*~Filter Used~*
Xero
Dbs flux
EyeCandy4000
*~Font Used~*
WL Scribble Flinger
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Delete word art layers.
Make purple rectangle 1 active and open paper 11 and
paste as a new layer.
Move up and make purple rectangle 2 active and open paper 11 again and paste as a new layer.
Make pink rectangle 1 active and open paper 7 and paste as a new layer.
Make pink rectangle 2 active and open paper 7 and paste as a new layer.
Move up to dotted rectangle 1 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.
Move up to dotted rectangle 2 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.
Now make rectangle active and open paper 21 and past as a new layer.
Make circle active and open paper 10 and past as a new layer.
Remember to drop shadow on the layers.
Open tube and paste as new layer.
Open wire and paste as new layer on top of rectangle layer.
Open thorn border and resize to 40% paste on top of thin black rectangles
Now delete both thin black rectangle layers and add drop shadow.
Open up spider and paste it were you want it.
Now add a new raster layer and move to bottom.
flood fill with black and add mask of choice.
Add copyright,signature and wordart
And we are done☺
Written by Mel 01 September 2012
Subscribe to:
Posts
(Atom)