Profile
Friday, October 25, 2013
Drama Llama
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Zlata M you can get the tubes Here
Scrap kit used Drama Llama by Bibi Collection you can find her amazing kits Here
Template used template 72 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font i used~*
Apantasia
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Delete layers 8,7,6 and 5.
Make raster 1 active and open paper 9 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 2 active and open paper 11 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 3 active and open paper 5 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 4 active and open paper 4 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Open tube of choice and paste as a new layer on top of raster 4.
~*Elements*~
Open element 13 and paste in the back of your tag, duplicate and move around until you
get the result you are looking for.
Open element 25 and paste as a new layer on top of layer 4 to the left.
Open element 30 and paste it to the back of your tag, duplicate and mirror until you get it
as you want.
Open element 42 and paste it on to raster 4 dulpicate and mirror, and duplicate and mirror again.
Open element 46 and paste on to the tube layer.
Open element 48 and paste it were you want it.
Open element 52 and resize to fit back of your tag, duplicate and flip it.
Open element 61 and paste as a new layer, duplicate and mirror...
Open element 62 and paste on to the tube layer to the left.
Open element 79 and paste as a new layer were you want it.
Add copyright, tagname and we are done!
Written By Mel 25th Oct 2013
Tuesday, October 22, 2013
I Must Feed
*~Supplies Needed~*
Tube of choice i used the scary art of Xeracx you can get the tubes Here
Scrap kit used Pumpkin 2 by Kristin you can find her amazing kit Here
Template used template 233 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
VanDerLee-Unplugged X - Interlace
*~Font i used~*
Grave Digger
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 9 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Now make copy of raster 9 active and use paper 4 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 8 active and open paper 6 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 8 active and use paper 6 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make copy of raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make raster 5 active and open paper 8 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and lighter.
Now make the raster 5 layer active again and go to eyecandy4000 - fire and add some fire effect to the layer with these settings:
Direction: 90
Column Length : 150
Flame Width: 15
Movement: 33
Check denser flames
Duplicate the layer and flip.
Make copy of raster 3 active and invert the colors.
Make raster 3 active and add a new raster layer to it and flood fill with white.
Merge down.
Take some parts of your tube of choice and paste in to the raster 3 layer.
Duplicate and mirror. Then go to properties and add some lumincance legacy to it,
duplicate again and go to properties again and add some screen to it.
Then go to VanDerLee and add some interlace to it with the settings you prefer.
Now make copy of raster 2 layer active and invert the color on it.
Then move up to raster 2 and make it active and open paper 1 and paste as a new layer.
~*Elements*~
Open frame 3 and resize to 450 x 450 and paste as a new layer on top of the raster 2 layer.
Open web and duplicate and merge down, add some gradient glow to it in color you prefer and flip it,paste it as a new layer on top of copy of raster 3.
Open splatter and paste as a new layer behind your tag, duplicate and move around as you like.
Open lights and resize to 677 x 63 and paste on top of the web.
Open swirls and resize to 40% and paste into the frame duplicate and mirror.
Open your tube and paste it on top of your tag.
Open sparkles and paste as a new layer over the tube.
Open pumpkin 2 and paste it to the right down beside your tubes feet.
Add these words " I Bite You Bleed, You May Scream But I Must Feed"
Now add copy Right and tag name and we are done!
Written By Mel 22th Oct 2013
Tuesday, October 15, 2013
Bloody Kiss
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Barbara Jensen you can get the tubes Here
Scrap kit used Zombiefied by Kristin
you can find the kit Here
Template used template 208 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Xero - Radience
VanderLee - Interlace
Dsb Flux - Bright Noise
*~Font i used~*
Drakon
Let us start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 12 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
(But this is optinal)
Make copy of raster 12 active and use the paper 5 again and paste it as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 11 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 11 active and open paper 4 again and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 6 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 1 active and open paper 1 and paste as a new layer,invert and delete.
Make raster 3 active and add some bright noise with these settings: intensity 35 Darker
Make copy of raster 13 active and add a new raster layer and flood fill with red and add some bright noise with these settings: intensity 35 Darker.
Make raster 14 active and open paper 1 and paste as a new layer.
add some gradient glow to is this time use color white and same settings as before.
~*Elements*~
Open web and paste it as a new layer on top of raster 13.
Open brad and paste it behind both raster 11.
Open city and paste as a new layer behind raster 5.
Open frame 3 and paste as a new layer on top of raster 13.
Open splatter and paste as a new layer move to bottom, duplicate and mirror as you like.
Open the tube of choice and paste as a new layer were you want it.
Open sparkles and paste on top of your tube.
Now add the words
"Take me from this earth an endless night
this, the end of life.
From the dark I feel your lips
and taste your bloody kiss."
Add copyright and tagname and we are done!
Written By Mel 15th Oct 2013
Saturday, October 12, 2013
Toxic Waste
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Toxic by Bibi Collection you can find her amazing kits Here
Template used template 115 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font Used~*
A Stitch Plus Ninie
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by delete these layers: "Black dot,Black frame,White square, black rectangle and white rectangle. (these are the ones that are small) Lt yellow square 1 and 2.
Now make Lt yellow square4 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Now go to the next layer and make the Lt yellow square3 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
The next layer is Lt yellow circle3 go on and make it active and open paper 8 and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make Lt yellow circle2 active and use paper 8 again and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make black dotted circle 3 active and add a new raster layer and floodfill with yellow.
add some bright noise to it same settings as before.
Do this to dotted cirlce 2 as well.
Make black circle 2 active and open paper 6 and paste as a new layer,invert and delete.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to the whole layer (the paper layer and border)it as well with the intensity 35
Make yellow rectangle active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Make the Lt yellow circle active and open paper 9 and paste as a new layer and invert and delete.
Make the yellow circle active and add some bright noise to it same settings as before.
Make the black rectangle actvie and open paper 6 paste as a new layer, add gradient glow to it in yellow, then add bright noise to the whole layer, then add some bright noise to the yellow frame to.
~*Elements*~
Open element 86 and paste as a new layer on top of you tag.
Open element 12 and paste it on top of the black rectangle layer, duplicate it to you have 4
and place them next to eachother.
Then open element 2 and paste on top of them.
Open element 21 and paste it on top of the tellow frame layer.
Open element 20 and paste it as a new layer behind the black rectangle layer.
Open element 3 and paste it as a new layer on top of the black rectangle layer.
Open element 34 and resize it 40% paste it to the left side corner in the bottom of your tag.
Open element 16 and resize it 50% and paste on top of the element 34.
Open element 7 and paste behind all layers, duplicate and mirror.
Open element 30 and resize to 50% and paste it down in the corner with the lizard and barrel.
Open element 40 and paste as a new layer on top of the yellow frma layer.
Open element 50 and paste it behind your tag, duplicate and flip.
Open element 53 and paste it on top of yellow frame layer.
Open element 59 and paste it behind the toxic word frame and duplicate and mirror.
Open element 6 and paste it down in the left corner of your tag together with the lizard,barrel and ammo.
Add the words"I've turned down so many people that would treat me like a queen and I run back to the person that's the most toxic for me." with the fornt of choice.
Now add you tube of choice and copyright and tagname and we are done.
Written by Mel 12 Oct 2013
Wednesday, October 9, 2013
Too cute too spook
*~Supplies Needed~*
Tube of choice i used the cute art of Alfadesire you can get the tubes Here
Scrap kit used Trickster by Kristin you can find her amazing kits Here
Template used halloween template 3 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright noise
Xero - Radience
L en K - Dimitri
Unplugged X - Interlace
*~Font Used~*
The loyalist
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
delete raster5.
delete words 1 and 2.
Make circle left active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make circle right active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make yellow rectangle active and open paper 21 and paste as a new layer,invert and delete.
add some bright noise to the yellow rectangle with the settings you prefer.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make orange rectangle active and open paper 7 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make white circle active and open paper 17 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make pixel word layer active and change the color to a darker orange color.
~*Elements*~
Open filmstrip and add a new raster layer, floodfill with black.
Move the floodfilled layer to bottom.
Now takes parts from the tube you are going to use and paste them as a new layer on to the black layer as a new layer, use your selection tool and remove access bits.
Then go to properties - luminance legacy and add some radience to it as well with these settings: 33- 84 - 194 - 151
Then go to L n K filter and use the Dimitri filter with these settings:
control: 5
Then we are going to add some interlace to it as a finish touch, go to your unplugged x filter and
choose interlace with these settings:
1- 50 - 50 - 1- 0- 50
transparency: 0
Normal
Then add a new raster layer this time white and move to bottom and merge down.
Add this on top of your tag.
Open splatter and paste as new layer, move to bottom and duplicate and rearrange as you like.
Open sparkles and paste as a new layer on top of the filmstrip.
Open house and paste it behind the filmstrip layer, then let only the roof of the house stick out on the top of the layer. Delete the bottom part.
Open lights and paste them in the bottom of the filmstrip.
Take the tube of choice and paste it on to your tag.
Open frame 4 and paste as a new layer behind black rectangle 1.
add some gradient glow to it.
duplicate and flip.
Open doodle 2 and paste as a new layer behind filmstrip.
Add the words "Too Cute Too Spook" with font of choice
add copyright and tagname and we are done!
Hope you enjoyed my tutorial☺
Written by Mel 9th Oct 2013
Tuesday, October 1, 2013
Vengeance
*~Supplies Needed~*
Tube of choice i am using the art of Alex Prihodko you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Toxic Terror" Kristin
(exclusive misfit kit)
Exclusive TPP Template By Kristin
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Amal
Let us start!
Open up the template shift + d to duplicate it and close out the original.
Make pink top rectangle active and open paper 20 and paste as a new layer.
Make pink bottom rectangle active and open paper 20 again and paste as a new layer.
Make top circle active and open paper 8 and paste as a new layer.
Make bottom circle active and open paper 8 again and paste as a new layer.
Make blue top rectange active and open paper 6 and paste as a new layer.
Make blue bottom rectangle active and open paper 6 again and paste as a new layer.
Make top square active and open paper 10 and paste as a new layer.
Make bottom square active and open paper 10 and paste as a new layer.
Make oval active and open paper 7 and paste as a new layer.
Remember to add shadow to all layers.
Frame
Open filmstrip add a new raster layer floodfill with color of choice
and move to bottom.
Now take the parts you want from the tube you are going to i use and paste it into to the frame 4 times.
Then merge the tube layers down and
go to xero - radience
with these settings:
128-50-128-255
Then go to background and go to
VanDer Lee - Unplugged X - Interlace
With these settings:
1-50-501-0-50
Normal
Then merge all layers and paste as a new layer on to template.
Elements
Open bow2 resize to 40% and paste it were you want it.
Open charm and paste under the bow2.
Open sparkle and paste as a new layer onto oval layer.
Open splatter paste as a new layer on top oval layer.
Open web resize to 55% paste behind filmstrip and duplicate and flip it.
Open spider and resize to what you like and paste as a new layer on top of the web.
Now add signature and copyright and we are done☺
Written by Mel 1 Oct 2012
Saturday, September 28, 2013
Rebel Devil
*~Supplies Needed~*
Tube of choice i am using the art of Verymany you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sexy Little Devil" By Bibi you can find the kit Here
Template 156 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Arctik
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Delete skulls,pixel words, circle,
Make left circle active and open paper 12 resize to 57% and paste as a new layer.
Make left glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9
Make right circle active and open paper 12 again and resize to 57%
and paste as a new layer.
Make right glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9
Make rectangle left active and open paper 4 and resize to 45% and paste as a new layer.
Make rectangle right active and open paper 4 and resize to 45% and paste as a new layer.
Make glitter rectangle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 46
Lightness: -4
Make wordart 2 active and open paper 4 and paste into selection.
Gradient 3 glow with light grey
Go to VanDer Lee - Unplugged x - Interlace with these settings:
1-50-50-1-0-50 Screen
Then gradient glow again 3 with light grey.
Open tube of chicue and paste as a new layer on top of star2 layer.
Go to xero-radience
With these settings:
13-112-225-181
Open element 20 and paste it behind the tube into the rectangle layer, as amny times you want.
Open element 34 and paste behind the tube on to rectangle 2.
Open element 4 and paste as a new layer behind the tube.
Open element 46 and paste behind the tube.
Add copyright and signature and we are done☺
Written by Mel 28 Sept 2012
Devil Vs Angel
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Devilish by Bibi Collection you can find her amazing kits Here
Template used template 57 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font Used~*
1001head
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Delete layer dottedrect & Dottedcircle & Redbits.
Make black rectangle layer active and open paper 2 and paste as a new layer,invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then make black rectangle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Dkgrayrect active and open paper 8 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make pink circle layer acitve and open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Redrect activeand open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make pink rects active and open paper 6 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make white circle active and open paper 1 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Merge down layers aroow 1 & 2 and add some bright noise to them
with settings: Intensity: 42 Darker
Add some white/black gradient glow to it with 3.00 as width.
Make the left square active and add a new raster layer to it, flood fill with colors of choice
and merge down.
Do this to right square as well.
Now make the word art layer active and flood fill "GOOD" White and the "S" in Vs.
Then flood fill the "EVIL" Black and the "V" in Vs.
Now add some gradient glow to it in Dark Red
Add some bright noise to it as well with same settings as before.
~*Elements*~
Open element 76 and 72 and resize both to 241 x 241, paste the black circle frame on top of the red one, then duplicate it and take them and post over the layers right square and left square to
make frames.
Then open the tubes you wanted to use and resize to fit into the frames, duplicate and delete access. Do this to both right and left square layer.
Go to the right and left square layer and delete left over parts that sticks outside the frames
use your selection tool.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Open element 8 & 9 and resize them to 241 x 241
And paste them were you lie them.
Open element 75 and paste it as a new layer on top of Blackrect.
Make white cirlce active and open element 69 and paste into selection.
Duplicate and flip.
Open element 43 and paste as a new layer on top of left square.
Open element 15 and paste it on top of right square.
Open element 53 and paste on top of layer pinkrects.
Open element 57 resize to 57% and paste behind your tag.
Add copyright, tagname and we are done!
Written by Mel 28 Sept 2013
Friday, September 27, 2013
W.i.t.c.h
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Celine Art you can get the tubes Here
Scrap kit used Witchy by Bibi Collection you can find her amazing kits Here
Template used template 121 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
*~Font Used~*
Forelle
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 2 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 3 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 4 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 5 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 6 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 7 active and open paper 1 (moon) add as a new layer, invert and delete.
make the layer 7 active again,invert and delete.
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
ELEMENTS
Open tube of choice and add as a new layer.
Open element 33 and paste as a new layer on top of layer 7 duplicate and mirror.
Open element 8 and paste on top of layer 5 duplicate and mirror.
Open element 41 resize to 85% and change the color on the frame to black or purple.
Paste it as a new layer.
Open element 56 and paste as a new layer were you want it.
Open element 11 and paste it down in the left corner.
Open element 14 and paste it onto the curtains, duplicate,mirror.
Open element 10 resize to 40% paste it were you want it.
Open element 78 and paste on top of the crystal ball.
Add copyright, tagname and word art and we are done!
Written By Mel 27 Sept 2013
Monday, September 23, 2013
I'll bite you scream!
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Arthur Crowe you can get the tubes Here
Scrap kit used Webbed by Kristin you can find her amazing kits Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Blade 2
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by delete raster 3, copy of raster 8, raster 8, and raster9.
Make raster 7 active and open paper 10 resize to 400 x 400 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer active and use paper 10 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 4 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 4 active and use paper 5 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy (2) of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 2 active nad open paper 6 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
~*Elements*~
Make raster 3 active and open string and paste as a new layer.
Open frame 1 and resize 430 x430 and paste as a new layer on top of the webbed string layer.
Open tube you are going to use and paste as a new layer behind the frame, duplicate and move the other part to the top, invert and delete. Use you selection tool to remove parts out side the frame on the top layer.
Open splatter and paste behind your tag, duplicate,mirror,duplicate,flip,duplicate and flip.
Open sparkles and paste as a new layer on top of your tube layer.
Open bat and resize to 40% and paste it were you like it.
Open flame and resize by 50% and flip it to the left and paste it behind your star frames, duplciate and mirror.
Open lightning rezie by 50% and paste it were you want it, duplicate and mirror.
Open rose resize by 50% and paste them were you want it.
Open wire and paste as a new layer on top of raster 5 duplicate,mirror.
Add the words "I'll bite you scream"
Add copyright and tagname and we are done!
Hope you enjoyed my tutorial☺
Written by Mel 23 Sept 2013
Friday, September 20, 2013
The lady is a vamp
*~Supplies Needed~*
Tube of choice i used the gorjuss art of The Hunter you can get the tubes Here
Scrap kit used Twilight by Bibi Collection you can find her amazing kits Here
Template used Vamp temp by Justine, you can download it over at the Misfit blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Taggetes
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make the copy of raster 3 active and open paper 1 and paste as a new layer, invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Now make copy of raster 3 part 2 active and open paper 9 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 9 active and open paper 7 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster 6 active and open paper 10 and resize to 400 x 400 and paste as a new layer, invert and delete.
Make the copy of the vector layer 1 active and open paper 8 resize to 600 x 600 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 7 active and open paper 6 and resize to 400 x 400 and paste as a new layer,invert and delete.
Make the copy of vector 1 part 2 active and open paper 10 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Delete raster 3.
Now open up the tube ofchoice and paste as a new layer.
Add some radience to it with these settings:
128 - 50 - 128 - 255
~*Elements*~
Open element 17 and paste behind your tag duplicate it,mirror it and flip it to you got one in every corner of your tag.
Open element 16 and paste it behind raster 9, duplicate and flip.
Open element 18 rotate it to the left and paste it behind the raster 9.
Open element 25 and paste it on top of raster 9.
Open element 27 and paste as a new layer on top of raster 9.
Open element 30 and paste as a new layer were you want it.
Open element 31 and resize it to 151 x 149 and paste it as a new layer into the first frame picture then promote to layer and remove the parts that sticks outside the frame with your selection tool.
Open element 32 resize it to 448 x 248 and paste it behind raster 9 and let the curten show in bottom of raster 9.
Then duplicate and mirror, then dulpicate and flip.
Make raster 7 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Make raster 8 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Open element 48 resize it to 40% and paste it were you want it.
Open element 50 resize to 50% and paste it on the bottom of your tag duplicate, mirror and move to bottom.
pen element 68 and paste it on top of your tube layer, duplicate and mirror.
Open element 83 resize to 50% then paste it were you want it.
Open element 97 resize to 80% then paste it behind the rip stone.
Now add copyright, tag name and we are done!
Hope you enjoyed my tutorial :o)
Written by Mel 20th Sep 2013
Tuesday, September 17, 2013
Do you like my pumpkins
*~Supplies Needed~*
Tube of choice i used the cool art of Danny Lee you can get the tubes Here
Scrap kit used Halloween Pumpkin by Bibi Collection you can find her amazing kits Here
Template used template 275 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Vm Distrotion - Broken Mirror
*~Font Used~*
Anderson The Mysterons
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by making layer 1 active and open paper 8 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 2 active and open paper 5 and paste as a new layer,invert and delete.
add bright noise to it with these settings:
Intesity: 35
Mix
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate and mirror
move so only the gradient glow we made shows outside layer 3 when you are happy
delete layer 3.
Make layer 4 active and open paper 7 and paste as a new layer,invert and delete.
then before you merge down make layer 4 active again and open paper 1 and paste as a new layer,invert and delete.
Now go to the layer with the orange paper and add some bright noise to it.
With these settings:
Intensity: 40
Lighter
Then move to the green paper layer and go to your filter "Vm Distrotion - Broken mirorr
with these settings: 16 - 16 - 16 - 92 - 0 - 92
Then we are going to add some fritillary to it by going to our Xero filter - Fritillary
With this settings: 5 - 30 - 10 - 0
Now make layer 4 active again and a
add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 5 active and open paper 7 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00
Soft corners: 25%
Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it when you only see the gradient glow
outside the layer 6 delete the layer 6.
Make layer 7 active and open paper 2 resize to 500 x 500 and paste as a new layer, invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it, when you only see the gradient glow outside the layer 8 delete layer 8.
Delete layer 9 and 10.
~*Elements*~
Open element 8 and paste it on top of layer 7 into the corner of the first square, duplicate and mirror.
Open element 1 and paste it on top of layer 7, use your selction tool and remove the bottom of the element so it looks like it stick through the frames.
Duplicate and mirror.
Open element 18 and paste on top of layer 5 in the corner to the top, duplicate,mirror.
add some sahdow to it. duplicate and flip,then duplicate and mirror.
Open element 22 and paste it on top of layer 4.
Open element 29 and paste it on top of the fence layer.
Open element 32 and paste in to top of layer 4 duplicate and flip.
Open element 33 and resize it to 67% and paste it as a new layer on top of layer 4
Open element 36 and paste it on top of layer 1 and duplicate mirror,duplicate and flip. do this until you have it in all 4 corners in back of your tag.
Now open the tube and paste it as a new layer.
Open element 48 and paste it on top of tube a few times to make it pop!
Open element 64 resize to 52% rotate it 90 to the left and paste it on the side of the frame layer. duplicate and mirror.
Open element 34 resize to 50% then paste it on your tag were you want it.
duplicate and mirror.
Now add the text " Do You Like My Pumpkins"
Add copyright and tag name and we are done!
Written by Mel 17th Sep 2013
Sunday, September 15, 2013
Little Boo
*~Supplies Needed~*
Tube of choice i am using the art of Arthur Crowe you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Silly Monsters 2" By Toxic Desirez you can find the kit Here
Template 185 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Amal
Let us start!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 13 and paste as a new layer.
Make bottom rectangle active and open paper 13 and paste as a new layer.
Make top square active and open paper 12 and paste as a new layer.
Make bottom square active and open paper 12 and paste as a new layer.
Make black top rectangle active and open paper 14 and paste as a new layer.
Make black bottom rectangle active and open paper 14 and paste as a new layer.
Make circle active and open paper 6 and paste as a new layer.
Make rectangle active and open paper 20 and paste as a new layer.
Open filmstrip and add a new raster layer and flood fill with white and
move to bottom.
Open tube and take 4 parts of the tube and paste into the filmstrip.
Merge all tube layers down and go to properties and choose luminance legacy
duplicate, choose soft light.
Go to the white layer and go to vanderlee - unplugged x - interlace
with these settings:
1-50-50-10-50
Normal
Then on both tube layers
go to xero- radience
With these settings:
128-50-128-255
Open wordart 1 and paste as a new layer on top of circle layer.
Open swirl 1 resize to 70% paste on top of bottom square layer
duplicate and mirror it.
duplicate again and flip and duplicate and mirror.
Open web resize to 63% and paste it on top of rectangle.
duplicate and mirror it, duplicate adn flip and duplicate and mirror.
Open sparkles and paste as a new layer on top of rectangle.
Open frame 4 and resize to 90% and paste as a new layer on top of circle.
Open flame paste on top of rectangle duplicate and mirror it.
Open claws resize to 55% and paste on top of circle.
Open tube of choice and and paste as a new layer.
Add copyright and signature and we are done☺
Written by Mel 15 Sept 2012
Friday, September 13, 2013
Queen of the night
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Voodoo Cutie 2 by Kristin you can find her amazing kits Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
Xero - Radience
*~Font Used~*
Mirella Script
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy of raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make the copy of raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some brisght noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 1 active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy (2) of raster layer active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make raster layer 2 active and open paper 1 and paste as a new layer,invert and delete.
Lets add some fritillary to it by going to our Xero filter and choose Fritillary
With these settings:
5- 30 - 10 - 0
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 9 active and change the color to black.
Merge down raster 8 and copy of rater 8 and make the merged layer active open paper 11 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 3 active and add a new raster layer, flodd fill with a dark brown.
Now lets add some bright noise to it with these settings:
Intensity: 50 Mix
~*Elements*~
Open frame 3 and paste as a new layer on your tag.
add some bright noise to it with these settings:
Intensity: 50
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Open filmstrip and add some radience to it with these settings:
126 - 50 - 125 - 255
add a new raster layer to it flood fill with a color you want and move to bottom.
Add 2 parts you like from your tube into the windows of the frame.
then open the doll and resize yo 40% and paste into the 2 other windows.
Merge down the layers with the tubes in and go to properities choose luminance legacy.
Then add some radience to it with these settings:
128 - 50 - 128 - 255
Copy merged and paste as a new layer on top of your tag.
Open frame 2 and paste it on top of the frame 3 layer.
Open flame resize to 40% and paste on top of the frame 3 layer on to in each corners.
then flip them.
Open splatter and paste as a new layer behind the whole tag, duplicate and mirror, duplicate and flip and duplicate and mirror.
Open swirl and paste as a new layer ontop of the raster 3 duplicate and mirror.
Open tube of choice and paste as a new layer.
Open sparkles and paste on top of the tube layer.
Add copyright, name and words of choice and we are done!
Hope you enjoyed my tutorial.
Written by Curiouz 13th Sep 2013
Subscribe to:
Posts
(Atom)