Followers

My Licenses

Arthur Crowe-AC128 Ami-AMIMEL BarbaraJensen-BJ1551 Cdo-Cdo-2090 Celine-CP1764MEL Cilm-CI3927LM CreativeMisfits-CM-213MA DannyLee-DL0014 DreamscapeImaging-DSI780 EliasChatzoudis-EAS11359 Gorjuss-SW2251 Help4CAsper-CAS029MA KeithGarvey-KG1057 MyPspTubes-MPT8644 PicsForDesign-PFD_MEL Pte-PTE0758 RachaelTallamy-011066MEL RomanZaric-RZ083 Satc-SATC0096 TheHunter-APSS0144 ThePspProject-TPP00144 TooshToosh-Toosh1365 TonyTzanoukakis-TTZ115 Verymany-VMT_MEL VmArtists-VMA_MEL Xeracx-IRM015A UYA-UpYourArt3406 ZindyZone-ZZT1089 ZlataMac-ZLATAM_Mel
Showing posts with label Ismael Rac. Show all posts
Showing posts with label Ismael Rac. Show all posts
Tuesday, October 22, 2013

I Must Feed


*~Supplies Needed~*
Tube of choice i used the scary art of Xeracx you can get the tubes Here
Scrap kit used Pumpkin 2 by Kristin you can find her amazing kit Here
Template used template 233 by Kristin, you can download it on her blog Here

*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
VanDerLee-Unplugged X - Interlace

*~Font i used~*
Grave Digger

Let us start! 
Open template and press shift + D to duplicate the template and close the original.
Make raster 9 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Now make copy of raster 9 active and use paper 4 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 8 active and open paper 6 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 8 active and use paper 6 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make copy of raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make raster 5 active and open paper 8 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and lighter.
Now make the raster 5 layer active again and go to eyecandy4000 - fire and add some fire effect to the layer with these settings:
Direction: 90
Column Length : 150
Flame Width: 15
Movement: 33
Check denser flames
Duplicate the layer and flip.
Make copy of raster 3 active and invert the colors.
Make raster 3 active and add a new raster layer to it and flood fill with white.
Merge down.
Take some parts of your tube of choice and paste in to the raster 3 layer.
Duplicate and mirror. Then go to properties and add some lumincance legacy to it,
duplicate again and go to properties again and add some screen to it.
Then go to VanDerLee and add some interlace to it with the settings you prefer.
Now make copy of raster 2 layer active and invert the color on it.
Then move up to raster 2 and make it active and open paper 1 and paste as a new layer.

~*Elements*~
Open frame 3 and resize to 450 x 450 and paste as a new layer on top of the raster 2 layer.
Open web and duplicate and merge down, add some gradient glow to it in color you prefer and flip it,paste it as a new layer on top of copy of raster 3.
Open splatter and paste as a new layer behind your tag, duplicate and move around as you like.
Open lights and resize to 677 x 63 and paste on top of the web.
Open swirls and resize to 40% and paste into the frame duplicate and mirror.
Open your tube and paste it on top of your tag.
Open sparkles and paste as a new layer over the tube.
Open pumpkin 2 and paste it to the right down beside your tubes feet.
Add these words " I Bite You Bleed, You May Scream But I Must Feed"
Now add copy Right and tag name and we are done!

Written By Mel 22th Oct 2013
Saturday, August 18, 2012

Fashion

*~Supplies Needed~*
Tube of choice i am using the art of Ismael Rac you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Fashion" By Bibi's Collection you can find the kit Here
Template kk temp10 By Kandi Kissez 

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L and K Zitah

*~Font Used~*
Amaldemo

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start by deleting credits, blue heart, stars and pink circle 1

Use your dropper tool and steal a pink color from paper 4
then make black rectangle active and flodd fill with the choosen color.
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Now move up to pink circle and make it active open paper 3 
add as a new layer...

Move up to black circle and make it active mark and open
paper 2 and add as a new layer...

Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Make blue rectangle active and mark and open paper 4
paste as a new layer..
add drop shadow.

Make angled rectangle active and mark and open tube of choice
and paste as a new layer, invert and delete.
Duplicate tube layer and make the orginal tube layer active
go to properties and choose luminance legacy.
Move up to duplicated tube layer and go to properties 
and choose soft light..
Mark the orginal tube layer
Now go to plugin L And K
Zitah
With these settings: 
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Now go to the duplicated tube layer 
Now go to plugin L And K
Zitah
With these settings: 
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32

Then mark the orginal tube layer again and go to
Xero- Radiance 
With these settings: 128 - 50 - 128 - 255

Then mark the duplicated tube layer and
Xero- Radiance 
With these settings: 128 - 50 - 128 - 255

Now make the white circle active and 
go to Xero - Fritillary
With these settings:
7 - 30 - 12 - 39

Make white circle active 
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32 
add drop shadow

Open element 68 and paste on top of black cirlce layer.

Open element 14 and paste it on top of layer angled rectangle and
blue rectangle.

Open element 18 resize 60% and paste as a new layer on top of
pink circle layer 2.

Open element 22 and paste on top of black circle.

Open element 24 and paste on top of black rectangle were you want it.

Now add the signature and copyright☺
Written by Mel 18 Aug 2012
Sunday, July 8, 2012

Strawberry Passion

*~Supplies Needed~*
Tube of choice i am using the art of Ismael Rac  Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Strawberry Passion" By Bibi you can find the kit Here
Template 2 By Ella

*~Filter Used~*
Xero
Unplugged X
EyeCandy4000

*~Font Used~*
Sagimaw light

Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove rec1 and rec2 layers.
Rotate Clockwise 90 

Start with the frame layer mark and flodd fill with this color #dc2837
Then dbs flux - bright noise
With these settings: 32 Mix

Now on to rec3 mark and open your close up tube of
choice and paste as a new layer.
Now right click and choose properties luminance legacy
duplicate and right click then properties
this time choose hard light.

Now go to unplugged x
With these settings: 1 - 50 - 50 - 1 - 0 - 50

Now take the tube of chocie and paste to the left or right for the frame and

Then go Xero - Porcelain
With these settings: 50 - 128 - 128 - 0 - 0 - 255

Elements!
Open element 10 and paste behind the rec1 and duplicate and move around as you like.
Open element 12 and paste on the mesh layer and duplicate 5 times and move up one and duplcate that 5 times as well.

Open element 16 resize to 70% and paste behind the legs of your tube.
Open element 17 and resize to 50% and paste behind the legs of your tube.
Open element 19 resize 60% and paste it besides the feet of your tube to the left.
Open element 21 and paste as a new layer on the mesh layer duplicate and flip.
Open element 2 and paste as a new layer on to the frame layer.
Open element 23 and place the drake inside the hand of your tube.
Open element 30 resize to 50% and paste near the tubes leg infront of all the others.
Now add the words,signature and copyright and we are done!
Written by Mel 8 July 2012

Search

Terms Of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun!

Blog Archive