Followers
Profile
My Licenses
Arthur Crowe-AC128
Ami-AMIMEL
BarbaraJensen-BJ1551
Cdo-Cdo-2090
Celine-CP1764MEL
Cilm-CI3927LM
CreativeMisfits-CM-213MA
DannyLee-DL0014
DreamscapeImaging-DSI780
EliasChatzoudis-EAS11359
Gorjuss-SW2251
Help4CAsper-CAS029MA
KeithGarvey-KG1057
MyPspTubes-MPT8644
PicsForDesign-PFD_MEL
Pte-PTE0758
RachaelTallamy-011066MEL
RomanZaric-RZ083
Satc-SATC0096
TheHunter-APSS0144
ThePspProject-TPP00144
TooshToosh-Toosh1365
TonyTzanoukakis-TTZ115
Verymany-VMT_MEL
VmArtists-VMA_MEL
Xeracx-IRM015A
UYA-UpYourArt3406
ZindyZone-ZZT1089
ZlataMac-ZLATAM_Mel
Showing posts with label Danny Lee. Show all posts
Showing posts with label Danny Lee. Show all posts
Tuesday, November 1, 2016
Lost ghost girl
♥Scrap Kit & Tube♥
Lost ghost tube By Danny Lee
Scrap kit Lost ghost By Bibi's Collection
Template 639 By Millie
♦Font♦
Adore
Labels:Danny Lee | 0
comments
Nightmare Clown
♥Scrap Kit & Tube♥
Murdere clown tube By Danny Lee
Scrap kit Carnival clown By Disturbed scraps
♦Font♦
Bolt cutter
Labels:Danny Lee | 0
comments
Sunday, February 14, 2016
Love Heartz
♥Scrap Kit & Tube♥
Love heart tube By Danny Lee
Scrap kit Fluffy Emo By Toxic Desirez
Template 173 By Tamie Here
♦Font♦
Billion stars
Labels:Danny Lee | 0
comments
Sunday, January 10, 2016
Frost Winter Girl
♥Scrap Kit & Tube♥
Frost Girlfriend tube By Danny Lee
Scrap Kit Icy black heart By Toxic Desirez
Template 336 By Kristin
Labels:Danny Lee | 0
comments
Tuesday, September 29, 2015
Angry Leprechaun
♥Scrap Kit & Tube♥
Gorjuss tube of Danny Lee
Toxik Angel scrap kit By Toxic Dezires
Template 362 By Kristin
♦Font♦
Parseltongue
Labels:Danny Lee | 0
comments
Sunday, May 11, 2014
Worship me
♥Scrap Kit & Tube♥
I used the scrap kit Princess by Bibi's Collection
I used also the tube to match by Danny Lee
♦Font♦
Mirella Scrpit Limited
Labels:Danny Lee | 0
comments
Saturday, October 12, 2013
Toxic Waste
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Toxic by Bibi Collection you can find her amazing kits Here
Template used template 115 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font Used~*
A Stitch Plus Ninie
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by delete these layers: "Black dot,Black frame,White square, black rectangle and white rectangle. (these are the ones that are small) Lt yellow square 1 and 2.
Now make Lt yellow square4 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Now go to the next layer and make the Lt yellow square3 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
The next layer is Lt yellow circle3 go on and make it active and open paper 8 and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make Lt yellow circle2 active and use paper 8 again and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make black dotted circle 3 active and add a new raster layer and floodfill with yellow.
add some bright noise to it same settings as before.
Do this to dotted cirlce 2 as well.
Make black circle 2 active and open paper 6 and paste as a new layer,invert and delete.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to the whole layer (the paper layer and border)it as well with the intensity 35
Make yellow rectangle active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Make the Lt yellow circle active and open paper 9 and paste as a new layer and invert and delete.
Make the yellow circle active and add some bright noise to it same settings as before.
Make the black rectangle actvie and open paper 6 paste as a new layer, add gradient glow to it in yellow, then add bright noise to the whole layer, then add some bright noise to the yellow frame to.
~*Elements*~
Open element 86 and paste as a new layer on top of you tag.
Open element 12 and paste it on top of the black rectangle layer, duplicate it to you have 4
and place them next to eachother.
Then open element 2 and paste on top of them.
Open element 21 and paste it on top of the tellow frame layer.
Open element 20 and paste it as a new layer behind the black rectangle layer.
Open element 3 and paste it as a new layer on top of the black rectangle layer.
Open element 34 and resize it 40% paste it to the left side corner in the bottom of your tag.
Open element 16 and resize it 50% and paste on top of the element 34.
Open element 7 and paste behind all layers, duplicate and mirror.
Open element 30 and resize to 50% and paste it down in the corner with the lizard and barrel.
Open element 40 and paste as a new layer on top of the yellow frma layer.
Open element 50 and paste it behind your tag, duplicate and flip.
Open element 53 and paste it on top of yellow frame layer.
Open element 59 and paste it behind the toxic word frame and duplicate and mirror.
Open element 6 and paste it down in the left corner of your tag together with the lizard,barrel and ammo.
Add the words"I've turned down so many people that would treat me like a queen and I run back to the person that's the most toxic for me." with the fornt of choice.
Now add you tube of choice and copyright and tagname and we are done.
Written by Mel 12 Oct 2013
Labels:Danny Lee,Tutorial | 0
comments
Tuesday, September 17, 2013
Do you like my pumpkins
*~Supplies Needed~*
Tube of choice i used the cool art of Danny Lee you can get the tubes Here
Scrap kit used Halloween Pumpkin by Bibi Collection you can find her amazing kits Here
Template used template 275 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Vm Distrotion - Broken Mirror
*~Font Used~*
Anderson The Mysterons
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Start by making layer 1 active and open paper 8 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 2 active and open paper 5 and paste as a new layer,invert and delete.
add bright noise to it with these settings:
Intesity: 35
Mix
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate and mirror
move so only the gradient glow we made shows outside layer 3 when you are happy
delete layer 3.
Make layer 4 active and open paper 7 and paste as a new layer,invert and delete.
then before you merge down make layer 4 active again and open paper 1 and paste as a new layer,invert and delete.
Now go to the layer with the orange paper and add some bright noise to it.
With these settings:
Intensity: 40
Lighter
Then move to the green paper layer and go to your filter "Vm Distrotion - Broken mirorr
with these settings: 16 - 16 - 16 - 92 - 0 - 92
Then we are going to add some fritillary to it by going to our Xero filter - Fritillary
With this settings: 5 - 30 - 10 - 0
Now make layer 4 active again and a
add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Make layer 5 active and open paper 7 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00
Soft corners: 25%
Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it when you only see the gradient glow
outside the layer 6 delete the layer 6.
Make layer 7 active and open paper 2 resize to 500 x 500 and paste as a new layer, invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it, when you only see the gradient glow outside the layer 8 delete layer 8.
Delete layer 9 and 10.
~*Elements*~
Open element 8 and paste it on top of layer 7 into the corner of the first square, duplicate and mirror.
Open element 1 and paste it on top of layer 7, use your selction tool and remove the bottom of the element so it looks like it stick through the frames.
Duplicate and mirror.
Open element 18 and paste on top of layer 5 in the corner to the top, duplicate,mirror.
add some sahdow to it. duplicate and flip,then duplicate and mirror.
Open element 22 and paste it on top of layer 4.
Open element 29 and paste it on top of the fence layer.
Open element 32 and paste in to top of layer 4 duplicate and flip.
Open element 33 and resize it to 67% and paste it as a new layer on top of layer 4
Open element 36 and paste it on top of layer 1 and duplicate mirror,duplicate and flip. do this until you have it in all 4 corners in back of your tag.
Now open the tube and paste it as a new layer.
Open element 48 and paste it on top of tube a few times to make it pop!
Open element 64 resize to 52% rotate it 90 to the left and paste it on the side of the frame layer. duplicate and mirror.
Open element 34 resize to 50% then paste it on your tag were you want it.
duplicate and mirror.
Now add the text " Do You Like My Pumpkins"
Add copyright and tag name and we are done!
Written by Mel 17th Sep 2013
Labels:Danny Lee,Tutorial | 0
comments
Friday, September 13, 2013
Alice in wonderland
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Alice by Bibi Collection you can find her amazing kits Here
Template used template 103 by Millie, you can download it on her blog Here
Mask of choice but I used Cmc _linesgrids-kristin-mask-5 by Kristin
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font Used~*
Alice in Wonderland
Let's Start!
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and open paper 9 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 3 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 4 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 5 active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 6 active and open paper 4 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Merge down layer 7 & 8 and make the merged layer active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45 Mix
*Elements*
Open element 102 and paste as a new layer on top of layer 10.
Open element 3 and paste as a new layer in the bottom of your tag behind all layers so it looks like a floor.
Open element 52 resize 50% and paste as a new layer on top of layer 9.
Open element 99 and paste as a new layer on top of layer 9.
open element 76 resize 60% paste it were you want it.
open element 75 resize to 60% and paste it were you want it.
open element 68 paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
open element 63 resize to 60% paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
Open element 6 and paste as a new layer on top of the layer 12 into the circle frames, duplicate then mirror.
open element 59 resize to 50% and paste as a new layer on top of layer 10 duplicate and mirror.
open element 50 and paste it were you want.
Open element 2 resize to 50% and paste it on top of layer 10 duplicate and mirror.
open element 126 and resize to 50% place it on top of layer 12 to the left then duplicate and mirror.
Open element 112 paste behind your tag duplicate and mirror so you get on sticking from each
corner behind your tag.
Open element 98 resize to 50% and paste it were you want on the tag.
Open your tube of choice and paste as a new layer on to your tag.
add some radience by going to your filter Xero - Radience
These settings:
233 - 158 - 63 - 206
open element 16 and paste on top of your tube
Now open a new raster layer flood fill with black use the mask of choice and paste it behind your tag.
Add the words "Well, when I was lost, I suppose it's good advice to stay where you are until someone finds you. But who'd ever think to look for me here?"
Add copyright, tagname and we are done!☺
Labels:Danny Lee,Tutorial | 0
comments
Thursday, June 6, 2013
Girl's Camp
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy the tubes Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Girls Camp" By Bibi Collection you can find her kits Here
*~Font Used~*
Tagetts
Let's Start!
This time i decided to make a tag without use of templates.
So open a new raster layer 750 x 750
then open element 80 and paste is as a new layer, duplicate it 4 times and put them as you like this wiill be
the background of your tag. Then merge visible.
Then open the element 1 and resize to 70% and paste it to the right or left.
Now open the element 73 and paste it so it looks like it is water under and around the cabin.
Then duplicate and mirror.
Open element 26 resize to 70% and paste as a new layer behind the cabin layer.
Open the tube and resize to 80% and paste as a new layer.
Open element 8 and paste in fron of the frame to cover the bottom of the frame.
Open element 84 and and paste as a new layer.
Open element 83 and resize to 50% and paste in fron to the frame on the gras.
Open element 74 and resize to 70% and paste it were you like it.
Open element 62 and resize to 52% and paste it on the frame layer on top to the left.
Open element 6 resize to 18% and paste on the gras duplicate and place more if you like.
Open element 36 ans resize to 32% and paste in the middle of the frame.
Now add copyright and word art of choice and signature name and we are done.
Hope you enjoyed my tutorial
Written by Mel 06.06.13
Labels:Danny Lee,Tutorial | 0
comments
Thursday, May 2, 2013
You should meet my mom!
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can find them Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Darkness" By Bibi Collection you can find the kit Here
Template of choice i used template 08 by Rachel
*~Filter Used~*
Xero
EyeCandy4000
*~Font Used~*
The worst
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Make grey strip layer active and open paper 5 and paste as a new layer, invert and delete.
merge down.
Now make black strip layer active and open paper 8 and paste as a new layer, invert and delete and merge down.
Now make the blue rectangle layer active and open paper 9 and resize 50% to make it fit, paste as a new layer invert and hit delete and merge down.
Make the glitter spots left layer active and go to new adjustment layer - hue/saturation/lightness
and use these settings:
hue: 77
saturation: 100
lightness: -4
then press ok.
Then make the glitter spots right layer active and go to new adjustment layer - hue/saturation/lightness
and use these settings:
hue: 107
saturation: 100
lightness: -6
then press ok.
Open up tube of choice and paste as a new layer.
then go to effects- plugins - xero - radience
with these settings: 128 - 50 - 128 - 255
Use your dropper tool and copy two colors from your tag.
then go back to layer grey strip and go to effects - eyecandy4000 - gradient glow
with these settings:
Glow width: 3
Soft corners: 25
Overall opacity: 100
check the (draw only outside selection)
do this to black strip, white frame layers as well.
and when you done it go back and use the other color you choice on those 3 layers as well..
Elements:
Open up element 10 paste it behind the black strip so it shows in the top of the right corner near the tubes head.
duplicate and mirror.
now open up the element 11 and resize 50% paste it behind the tube on the left then duplicate and mirror it.
open element 19 resize to 69% and paste behind the grey strip duplicate and flip it.
open element 60 and resize 50% then paste as a new layer on top of your tube's legs.
open element 58 and resize 50% and paste it were you want it..
then go to effects - eyecandy 4000 - gradient glow
with these settings:
Glow width: 3
Sof corners: 25
Overall opacity: 100
color: hotpink
Nearly done!
Now choose a word art you want add it and then add copyright
and at last the name you want on your tag!
We are donehope enjoyed my tutorial!☺
Written by Mel 02 May 2013
Labels:Danny Lee,Tutorial | 0
comments
Sunday, April 21, 2013
Plush Bunny
Labels:Danny Lee | 0
comments
Saturday, April 13, 2013
Sugar Girl
♥Scrap Kit & Tube♥
Sugar girl tube of Danny Lee
Scrap Kit Sugar Girl By Bibi's Collection
♦Font♦
Amal
Labels:Danny Lee | 0
comments
Monday, April 1, 2013
Queen Bee
♥Scrap Kit & Tube♥
Bumble girl tube By Danny Lee
(This is not in store anymore)
Scrap kit Bee bee By Bibi's Collection
♦Font♦
Save the honeybee
The worst
Labels:Danny Lee | 0
comments
Thursday, September 27, 2012
I only look innocent
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Princess" By Toxic Desirez you can find the kit Here
Template By JEK Creations Here
*~Filter Used~*
EyeCandy4000
*~Font Used~*
Andyfish
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Remove credit and R6 layers.
Make R11 active and open paper 6 and paste as a new layer.
Make R9 active and open paper 6 again and paste as a new layer.
Now make R5 active and open paper 8 and paste as a new layer.
Make R4 active and open paper 16 and paste as a new layer.
Make R3 active and open paper 16 again and paste as a new layer.
Make R2 active and open paper 9 and paste as a new layer.
Open tube of choice and paste it as a new layer.
Open wire and paste it as a new layer on to R2
Open frame 2 and paste it as a new layer on to R2 over the wire.
Open chain 2 and resize to 52% and paste it right behind the tube.
Open divider and paste as a new layer on to R5 and duplicate and flip.
Open sparkles and paste as a new layer on to R1.
Add a new raster layer and move to bottom, open a paper from the kit and mask it with the mask of choice.
Now add copyright and signature and we are done☺
Written by Mel 27 Sept 2012
Labels:Danny Lee,Tutorial | 0
comments
Saturday, September 1, 2012
I Make Boys Cry
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Toxicity" By Toxic Desirez you can find the kit Here
Template Emo misfits temp 2011 By Kristin Here
Mask of choice
*~Filter Used~*
Xero
Dbs flux
EyeCandy4000
*~Font Used~*
WL Scribble Flinger
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Delete word art layers.
Make purple rectangle 1 active and open paper 11 and
paste as a new layer.
Move up and make purple rectangle 2 active and open paper 11 again and paste as a new layer.
Make pink rectangle 1 active and open paper 7 and paste as a new layer.
Make pink rectangle 2 active and open paper 7 and paste as a new layer.
Move up to dotted rectangle 1 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.
Move up to dotted rectangle 2 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.
Now make rectangle active and open paper 21 and past as a new layer.
Make circle active and open paper 10 and past as a new layer.
Remember to drop shadow on the layers.
Open tube and paste as new layer.
Open wire and paste as new layer on top of rectangle layer.
Open thorn border and resize to 40% paste on top of thin black rectangles
Now delete both thin black rectangle layers and add drop shadow.
Open up spider and paste it were you want it.
Now add a new raster layer and move to bottom.
flood fill with black and add mask of choice.
Add copyright,signature and wordart
And we are done☺
Written by Mel 01 September 2012
Labels:Danny Lee,Tutorial | 0
comments
Tuesday, August 21, 2012
Mental Institution
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Hellz Angel" By Toxic Desirez you can find the kit Here
Template 170 By Kristin Here
Mask of choice i used mask 122 by Design By Vaybs Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
L & K Zitah
*~Font Used~*
Suger Death
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make thin top rectangle active, mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now make thin bottom rectangle active , mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now move up and make purple top rectangle active, mark and open paper 16
and paste as a new layer.
Move up and make purple bottom rectangle active, mark and open paper 16
and paste as a new layer.
Make blue top rectangle active, mark and open paper 10 and paste as a new
layer.
Make blue rectangle bottom active, mark and open paper 10
and paste as a new layer.
Make purple top rectangle active, mark and open paper 13 and
paste as a new layer.
Make purple bottom rectangle active, mark and open paper 13 and
paste as a new layer.
Now make pink cirlce left active, mark and flood fill with black
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Then make pink cirlce right active, mark and flood fill with black.
Then go to Xero-Fritillary
With these settings: 5-30-10-21
Now make the circle active mark and open paper 11 and
paste as a new layer.
Elements:
Open web and paste it on top of cirlce layer.
Now open film strip add a new rater layer and flodd fill with black.
Then take parts of the tube and paste it into all the windows in the
film strip frame.
Now go to xero-radience
With these settings: 44- 58-189-222
Now merge only the tube layers, and duplicate.
Go to the original tube layer and go to properties - luminance legacy.
Then go to the duplicated tube layer and go to properties - screen.
Then again go to the original tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32
Then again go to the duplicated tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32
Then go to vanderlee- unplugged x-interlace
With these settings: 1-50-50-1-0-50
Do this to both orginal and duplicated tube layer.
Then merge all and paste the film strip as a new layer ontop of the web
Open doodle and put some gradient glow on it, then paste it behind the film strip.
Open splatter and paste it over the thin top layer then duplicate
and flip and mirror it and move it up to bottom thin rectangle.
Open sparkles and place it as a new layer on top of film strip.
Open skulls and paste them were you want.
Now flood fill the background layer with black, add mask of choice.
Now paste your tube as a new layer
Then add signature and copyright and we are done=)
Written by Mel 21 Aug 2012
Labels:Danny Lee,Tutorial | 0
comments
Saturday, August 18, 2012
Bad Reputation
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Sweet Music 2" By Toxic Desirez you can find the kit Here
Template 177 By Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
Dk Criss Cross
BillyBop
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make top black square active
mark with your magic wand tool and open paper 11
and paste as a new layer.
Make bottom black square active then mark and open paper 11
and paste as a new layer.
Move up and make top red circle active and open paper 9
and paste as a new layer...
Then move up to bottom red circle and make it active then mark and
open paper 9 and paste as a new layer.
Move up and make top rectangle active and mark and open
paper 2 and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39
Move up and make bottom red rectangle active mark and open paper 2
and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39
Make round rectangle active and flood fill with a light grey color and
open tube of choice and paste.
duplicate the tube layer and mirror it,
duplicate both tube layers.
Make the orginal tube layer active and go to properties and
choose luminance legacy, then go to the duplicated layer and choose
soft light.
Make the duplicated tube layer active and go to properties and
choose luminance legacy, then go to the duplicated 2 layer and choose
soft light.
Now go to xero . radiance
with these settings:
128-50-128-255
Do this to all tube layers.
Make round rectangle active again and go to
VanDer Lee - Unplugged X - Interlace
With these settings: 1-50-50-1-0-50
Move up and make circle layer active and mark and open paper 21
paste as a new layer.
Open frame 1 and paste as a new layer on top
of circle layer.
Open element scatter and paste on background layer as a new layer and
duplicate adn flip it.
Open skull & web element and paste as a new layer behind round rectangle.
duplicate and flip it.
Open speaker and paste as a new layer on top of circle layer into the frame 1.
Open element wire and paste on top of frame1 and under the speaker layer.
open element note circle and paste as a new layer on top balck square layer.
Gradient glow with a red color.
Paste the tube of choice as a new layer and
go to Xero - Radience
This settings: 128-50-128-255
Now add the word art you want.
Signature and copyright and we are done☺
Written by Mel 18 Aug 2012
Labels:Danny Lee,Tutorial | 0
comments
Friday, August 3, 2012
Endless Summer
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Rock" By Toxic Desirez you can find the kit Here
Template By Slow
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
Vm Distortion
Dbs Flux
*~Font Used~*
Clarck summit
Sugar Death 2
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start with bg layer open filter unlimited 2.0 and go to Vm distortion
Radial pox with these settings: 175 - 99 - 109 - 39
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now move on to 1 and open paper 21 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Open layers 2-3 and 4 and merge down
now mark and open paper 25 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now on to 5 mark and open paper 16 and paste
as a new layer.
On layer 6 mark and open paper 15 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Delete layer 7-8
Go to layer 9 mark and open paper 17 and paste as a new layer.
Got to layer 10 mark and add a new raster layer and flood fill with black
On layer 9 - 10 use gradient glow 3.00 with color hot pink.
Now find a lyric you want and write into layer 10 with a green color from the tube.
Add tube and copyright and
signature and we are done☺
Written by Mel 3 Aug 2012
Labels:Danny Lee,Tutorial | 0
comments
Wednesday, July 11, 2012
S & M
*~Supplies Needed~*
Tube of choice i am using the art of Danny Lee you can buy Here
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Black Heart" By Toxic Desirez you can find her kits Here
Template 179 By Kristin Here
Mask of choice i used mask by Kristin Here
*~Filter Used~*
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
48ver lost
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom with top black square mark and open paper 10
and paste as a new layer.
Then move up to bottom black square mark and open paper 10
and paste as a new layer.
Go to rectangle mark and open paper 9 and paste
as a new layer.
Move up to top red circle mark and open paper 16 and
paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0
Now bottom red circle mark and open paper 16
and paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0
On to top round rectangle mark and open paper
7 and paste as a new layer..
Then to bottom round rectangle
mark and open paper 7 and paste as a new layer.
Go to circle mark and go to xero - frtillary
With these settings: 5 - 30 - 10 - 0
Choose a lyric you like and that fits the tube and paste it into
cirlce layer.
Elements:
Now open frame 2 and paste as a new layer
Open collar resize 40% and paste were you want it..
Open butterfly resize to 30% and paste were you like it.
Open flower 1 resize to 30% and paste it were you want it.
Open sparkles and paste it as a new alyer on bottom round rectangle.
Open frame 1 and paste as a new layer on top of bottom round rectangle.
Open a new canvas 750 X 650 and floodfill with black and add mask of choice.
Now add tube of choice,signature and copyright!
Written by Mel 11 July 2012
Xero
Unplugged X
EyeCandy4000
*~Font Used~*
48ver lost
Let us Start!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom with top black square mark and open paper 10
and paste as a new layer.
Then move up to bottom black square mark and open paper 10
and paste as a new layer.
Go to rectangle mark and open paper 9 and paste
as a new layer.
Move up to top red circle mark and open paper 16 and
paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0
Now bottom red circle mark and open paper 16
and paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0
On to top round rectangle mark and open paper
7 and paste as a new layer..
Then to bottom round rectangle
mark and open paper 7 and paste as a new layer.
Go to circle mark and go to xero - frtillary
With these settings: 5 - 30 - 10 - 0
Choose a lyric you like and that fits the tube and paste it into
cirlce layer.
Elements:
Now open frame 2 and paste as a new layer
Open collar resize 40% and paste were you want it..
Open butterfly resize to 30% and paste were you like it.
Open flower 1 resize to 30% and paste it were you want it.
Open sparkles and paste it as a new alyer on bottom round rectangle.
Open frame 1 and paste as a new layer on top of bottom round rectangle.
Open a new canvas 750 X 650 and floodfill with black and add mask of choice.
Now add tube of choice,signature and copyright!
Written by Mel 11 July 2012
Labels:Danny Lee,Tutorial | 0
comments
Subscribe to:
Posts
(Atom)
Search
Labels
- Alehandra Vanhek
- Alex Prihodko
- Alexander McMillian
- Alfadesire
- Amber
- Andy Cooper
- Anna Liwanag
- Anne Stokes
- Arthur Crowe
- Barbara Jensen
- Brian Gibbs
- CelinArtPinup
- Celine
- Chris Pastel
- Danny Lee
- Dave Nestler
- Di Halim
- Elegance Goldwasser
- Elias Chatzoudis
- Enamorte
- Freebie
- Gorjuss
- Ismael Rac
- Jasmine Becket Griffith
- Jay Trembly
- Jessica Dougherty
- Kamilla Goldwasser
- Keith Garvey
- KiwiFireStorm
- Lady Mishka
- Lysisange
- Marc Duval
- Mariel
- Misticheskaya
- Nocturne
- Robin Mcquay
- Roman Zaric
- Scott Blair
- Screaming Demons
- Skyscraps
- Spazz
- Stella Felice
- The Hunter
- Tooshtoosh
- Tutorial
- Vadis
- Verymany
- Vi Nina
- Vinegar
- Wallpaper
- Wordart
- Zebrush
- Zindy S.D. Nielsen
- Zlata M
Terms Of Use
Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun!














































